Alle berichten

Michelvd No, the potentiometer is a part of the circuit (which is connected directly to mains power).

2022-01-02 06:02:17 Nuttig (0)
Verzenden
antwoorden (1)

Q: Can i look in this with my eye or smartphone compatible only?

gevraagd door Oliver Hriň op 2021-10-20 05:39:32

Michelvd You can use it with (one) eye too.. just leave the bracket off...

2021-10-20 05:41:42 Nuttig (0)
Verzenden
antwoorden (3)

Q: does it take 21700 battery?

gevraagd door BG322245211 op 2021-08-21 10:16:57

Michelvd Battery is not replacable as far as I can see

2021-08-23 11:17:36 Nuttig (0)
Verzenden
antwoorden (17)

Q: Are these waterproof?.

gevraagd door gunner op 2021-07-28 10:54:09

Michelvd No, these are not waterproof, you need the ones with silicon coating

2021-07-29 01:28:35 Nuttig (0)
Verzenden
antwoorden (2)

Michelvd Did you check if you got RX-TX the right way round ? According to documentation ESP32 RX is 34 and ESP32 TX is 12. Baudrate is normally 9600-n-8-1

2021-06-22 09:09:32 Nuttig (0)
Verzenden
antwoorden (1)

Michelvd It is realtime, no delay and no jerky images. I use it for soldering smd components.

2020-10-19 05:47:21 Nuttig (0)
Verzenden
antwoorden (4)

Q: Does it have english version ?

gevraagd door samsambm op 2020-10-01 12:52:07

Michelvd Yes and you can write your own software for it in the language of your choosing.

2020-10-01 02:35:30 Nuttig (0)
Verzenden
antwoorden (2)

Michelvd It can work but you should be very careful not to overload the motor. If you have 220V AC, you can in theory supply the motor with 220V DC ! Also the current when you supply the motor with 130V DC and with the power of 2088W you are already above the 15A limit of this device (2088:130=16A). You need to make sure you don't supply more than 100-110 V DC to the motor to be on the safe side. Otherwise get a bigger controller or anoher motor :)

2020-05-28 04:41:25 Nuttig (0)
Verzenden
antwoorden (1)

Michelvd If you use Windows you need a CH340 driver installed. On a MacOS or Linux machine you do not need drivers. Please check if the switches are pushed really to the end on the dipswitch. Does the powerled come on on the board ? You might have a defective cable. Download links for the driver and schematics and such are in the productpage.

2020-05-15 03:37:50 Nuttig (4)
Verzenden
antwoorden (7)

Michelvd Just plug in a micro usb charger. The charge led will come on during charging.

2020-04-13 04:08:35 Nuttig (0)
Verzenden
antwoorden (2)

Michelvd You can regulate the voltage on the output with the potentiometer (the knob), so should be no problem. The metal case is not connected to the live connections (at least not on the one I got), it is always safe to earth it.

2020-04-03 06:13:02 Nuttig (0)
Verzenden
antwoorden (2)