MartinC
mijn inhoud
Alle berichten
Beoordelingen
Reacties
antwoorden
vragen

Alle berichten

MartinC 10/04/2019
Used this for the first time today, worked far better than I expected, laser printed a small circuit, taped it to pcb material that had been cleaned with alcohol following cleaning with fine steel wool and then ironed it in place. The backing paper peeled clean off and left an accurate pcb mask on the copper. I etched with ferrous chloride and was left with a perfect pcb. Only criticism was that the paper was poorly protected in the post and `i had to leave it under a heavy weight for a few days to flatten it to an acceptable level to be used in my HP laser printer. I found that my printer will take these A4 sheets cut into quarters, i.e. A6. this makes it a lot more economical to use. My next experiment is to see if it can be re used for another copy of the circuit. I will definitely be buying more of this in the future.
10 stuks A4-vellen Warmte PCB Thermische Transferpapier Toner Voor DIY Elektronische Prototype Mak PCB-Printplaat
US$3.49 US$4.49
1
aanbevelingen
Reacties (0)
MartinC 12/02/2019
I use these with salvaged Li-ion/ Li-Po cells along with a small boost converters to power LED’s in 3D printed light fittings and displays.
10 stuks TP4056 Micro USB 5V 1A Lithium Batterij Oplaad Beschermingskaart TE585 Lipo Oplader Module
US$6.00 US$11.99
0
aanbevelingen
Reacties (0)
MartinC 25/03/2019
These are a direct replacement for Gilllette blades and seem just as good only a fraction of the price.
GFLV® 16pcs 5 Lagen Blades Scheerbeurt Shaver Heads vervanging voor Gillette
US$19.99 US$29.99
0
aanbevelingen
Reacties (0)
MartinC 29/05/2019
excellent little lights, quite bright on full brightness but even on a lower setting to conserve battery life the are bright enough to achieve a good effect. remote control works well and at a reasonable range. haven’t tried submerging them yet but have been left outside for a week in heavy rain with no ill effects.
10X Afstandsbediening Waterdichte RGB Dompelpompen LED Kaars Theelicht Tafellamp Decoratie
US$12.33 US$13.67
0
aanbevelingen
Reacties (0)
MartinC 01/08/2019
neat little module, easy to set up and use.
3Pcs DS3231 AT24C32 IIC Real Tijdklokmodule Geekcreit voor Arduino - producten die werken met officiële Arduino-boards
US$5.63
0
aanbevelingen
Reacties (0)
MartinC 01/08/2019
neat little unit. does what I need it to.
Geekcreit® LCR-T4 12864 LCD Grafische Transistor Tester Weerstand Capaciteit ESR SCR Meter
US$12.99 US$17.99
0
aanbevelingen
Reacties (0)
MartinC 01/08/2019
As described. fit breadboards well.
120 stuks 20cm mannelijk naar mannelijk gekleurd breadboard verbindingskabel Dupont draad
US$5.99 US$6.99
0
aanbevelingen
Reacties (0)
DC-DC verstelbare voeding Buck Converter Step Down-module
US$7.99 US$9.99

Q: What is the EN pin on the input for?

gevraagd door MartinC op 2019-04-18 01:57:42

APteH EN is chip enable. A high is Enable, low is disable

2019-05-20 06:42:31 Nuttig (2)
Verzenden
antwoorden (3)
MartinC 10/04/2019
Perfect for cleaning up holes in models that have been 3D printed. I now deliberately make the holes a fraction smaller than needed so that I can use this tool to achieve perfect holes.
DT01 Randruimer Professionele ruimer universeel gatboorgereedschap 0-14 mm opener ruimer
US$7.99 US$9.99
0
aanbevelingen
Reacties (0)
MartinC 25/03/2019
excellent for micro controller projects suck as arduino controlled lighting.
5V 1-kanaals niveautrigger optokoppelaar relaismodule
US$2.99 US$8.99
0
aanbevelingen
Reacties (0)
MartinC 25/03/2019
excellent. use them for running esp8266 based projects from mains supply. such as Alexa controlled sockets and lights.
3 stuks 5V 700mA 3.5W AC-DC Stap-omlaag afgezonderde schakelende voeding module
US$9.99 US$11.99
0
aanbevelingen
Reacties (0)
MartinC 25/03/2019
exactly what they claim to be, good selection of cheap resistors. you just need to find an appropriate method of storage as they are just strips of resistors.
1000 stuks 5% 1 / 2W 0,5W metalen film weerstand 50 waarden assortiment kit 0,1 ohm ~ 4,7m ohm condensator
US$13.99 US$16.99
0
aanbevelingen
Reacties (0)
MartinC 12/02/2019
I used one of these to repair a faulty touch sensitive lamp and it fitted as a direct replacement. This has 3 light levels as opposed to just the on/off unit that it replaced. Be aware that it is not suitable for led or cfl lamps, just filament or halogen bulbs. I think that is how the original one was destroyed.
AC 220 V 3 Way Touch Control Sensor Switch Dimmer Lamp Bureaulamp Onderdelen
US$7.99 US$10.99
0
aanbevelingen
Reacties (0)
MartinC 09/02/2019
Used this to power an LED display light, measured capacity appears to be 1750 mAh when measured using a TP4056 as charge controller and discharging at a current of 40 mA.
Eachine EV800 FPV Goggles Reserve Onderdeel 3.7V 2000mAh Lipo Batterij
US$11.41 US$13.69
0
aanbevelingen
Reacties (0)
MartinC 16/10/2018
I have bought several of these and so far they have all been reliable. I use them with usb led light bars for under cupboard lighting. they get quite warm after prolonged use at 5w output but remain reliable up to now. (about a month of every day use) will definitely order more.
UK Home Wall 3 Pin USB Plug Power Adapter Lader Voor iPhone 6S Plus Mobiele Telefoon Tablet
US$1.99
0
aanbevelingen
Reacties (0)
MartinC 16/10/2018
this is my second batch of glue, use it for insulating electrical repairs and projects as well as general purpose hobby use. with a variable temperature gun this can be used either hot and very fluid or cooler and bulky, either way it sticks extremely well. can be rather stringy at lower temperatures but not difficult to deal with with practice.
10pcs 11mm x 247mm EVA Clear Hot Melt Glue Adhesive Sticks For Glue Gun
US$4.16 US$15.99
0
aanbevelingen
Reacties (0)
MartinC 28/06/2018
accurate and bright display. use this wiring diagram but ignore the shunt.
Dual Rood Blauw LED Digitale Voltmeter Ammeter Panel Volt Gauge Meter
US$7.50 US$9.00
4
aanbevelingen
Reacties (0)
MartinC 20/03/2018
Especially as these come with the appropriate spare mandrels these make a cheap way of topping up your sanding drums, far cheaper than buying locally and of comparable quality. I use these in a Dremel but I believe they will fit any similar rotary tool. My wife also uses them in her electric nail tool for when she is dealing with acrylic nails. I have bought her her own set so I don't have to keep searching for mine!
102 stuks 120 korrel schuurdrumset met 1/2 3/8 1/4 inch schuurmandrellen geschikt voor Dremel roterende gereedschappen
US$6.00 US$11.99
0
aanbevelingen
Reacties (0)
MartinC 20/03/2018
These are not very sturdy but more than adequate for small components.
5Pcs Geekcreit® 24 Value Electronic Components Opslag Assortiment Box
US$19.99 US$23.99
0
aanbevelingen
Reacties (0)
MartinC 20/03/2018
I use these when I need to use AA or AAA batteries in 3D printed projects. More than adequate for this purpose, easy enough to include 1s,2s,3s or more cell holders in designs. I have even used them for 18650 cells in low current applications as I don't think they would be up to carrying any more current than a typical AA cell can deliver due to the thin material they are made of.
10 Pairs Silver Tone Metaal Battery Springplate Set voor AA AAA batterijen
US$2.99 US$3.99
0
aanbevelingen
Reacties (0)

Jij bent de expert, kan je helpen?

We nodigen je van harte uit om je te abonneren op de Invite Answer-e-mail!

Als u zich abonneert, nodigen we u uit via e-mail om vragen te beantwoorden die mensen hebben over producten. Door je te abonneren, verdien je ook de "Behulpzame Badge "! U kunt zich op elk moment uitschrijven op de pagina met privacyinstellingen.

Help anderen en wees gelukkiger!

  • Abonneren

Over badges

Badges zijn gerelateerd aan de community en gebruikers verdienen badges door kwaliteitsinhoud te creëren, missies te voltooien of door deel te nemen aan speciale activiteiten. Specifieke mensen hebben ook hun eigen exclusieve badge.
CEO badge

de ceo-badge is alleen in handen van de baas van Banggood.

Badges die je kunt verdienen, komen binnenkort
  • Oké

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • Oké

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe