Alle berichten

Libra Devi assicurarti di aver caricato la batteria dello Spitfire e che le batterie del controller siano a posto. Quindi prima metti la batteria nell'aereo, accendi il controller, sposta lo stick di controllo sinistro in alto e poi di nuovo in basso. Questo "legherà" l'aereo con il controller. Dopo questo l'aereo dovrebbe funzionare, se non contatta il servizio clienti Bangood..

2022-10-27 02:13:07 Nuttig (0)
Verzenden
antwoorden (3)

Q: what does the osd display?

gevraagd door BG189355518 op 2022-10-12 09:13:35

Libra The OSD displays in your Goggles.....

2022-10-12 09:23:38 Nuttig (1)
Verzenden
antwoorden (1)

Libra If as you say all the inputs are working except the motor. I'm sure you have moved the throttle stick up and down to arm the plane?.. If you are using another controller instead of the one that comes with the plane, are you sure you have armed the motor?

2022-09-15 11:27:45 Nuttig (0)
Verzenden
antwoorden (2)

Q: will this be OK for taranus qz7?

gevraagd door BG346111664 op 2022-08-20 07:45:16

Libra This Ant. is for 2.4Ghz therefore it will work with your Radio. It gives a slightly stronger signal at 5db. but check that the tail connection to your TX is correct..

2022-08-22 05:55:16 Nuttig (0)
Verzenden
antwoorden (1)

Libra It's very possible that the vibration is from the Prop being out of balance but a 12x6 prop is also too big and this could be why the motor is over heating. I am only using 11x6 on the larger Volentex plane the Assent. Try a smaller prop and make sure you balance it.. Good luck

2022-08-11 02:49:33 Nuttig (0)
Verzenden
antwoorden (2)