DuMOHsmol
mijn inhoud
Alle berichten
Beoordelingen
Reacties
antwoorden
vragen

Alle berichten

DuMOHsmol 26/02/2018
Well, the camera works, but actually isn't a CCD camera at all! And even more, the picture quality is worse than on cheaper and lighter micro cams! The stock lens has a narrow angle, the colors are washed out, and the picture is full of oversharping artifacts. Take a look my comparison with Kingkong mini camera. The Eachine is clearly inferior here, and the picture is even worse in movement because of oversharping. Do not recommend!
Eachine 1000TVL 1/3 CCD 110 graden 2.8 mm lens breed voltage 5-20V Mini FPV-camera NTSC PAL Schakelbaar
US$10.15 US$22.79
8
aanbevelingen
Reacties (1)
IRangeX IRX4 LITE CC2500 NRF24L01+ A7105 CYRF6936 4 IN 1 Multiprotocol TX Module voor Frsky X-lite
US$32.99 US$63.99

Q: Is it compatible with BetaFPV LiteRadio 3 Pro?

gevraagd door DuMOHsmol op 2022-09-11 10:22:15

Mauro yesit is copatible

2022-09-21 02:38:47 Nuttig (1)
Verzenden
antwoorden (1)
DuMOHsmol 26/02/2018
These are the most aggressive 3mm props for 11xx motors that I could find. They work great with 2S-3S battery and 1106-6000KV motor.
2 Paar Gemfan 3035 3X3.5 BN 3-blade Propeller PC 1.5 mm Montagegat voor 1104 1105 Motor RC Drone FPV Racing
US$8.07 US$8.99
1
aanbevelingen
Reacties (0)
DuMOHsmol 26/02/2018
Great value for the price. I like how this frame can fit "larger" components normally used on 250mm quads, like a 600mw transmitter or 35x35mm flight controller. Here are some build tips: 1. The stock standoffs are pretty short, you might need longer ones. The standoffs here are for m2.5 screws. 2. The stock camera plate is for cameras with M12 lens, it doesn't hold a micro camera. Also, this plate will obviously not work with longer standoffs. Eventually, I had to 3D-print a camera holder. 3. There is a little PDB included (which is great!), but the 12V output does not provide 12V at all! I've even had 4.6V on nearly-discharged 2S battery (instead of 12V!). Do not use this PDB output at all, connect your 12V-demanding components directly to the battery voltage. The 5V outputs works fine.
KINGKONG / LDARC 130GT 130 mm carbon FPV-raceframe met 5V 12V PDB voor RC Drone
US$11.11 US$14.24
4
aanbevelingen
Reacties (2)
DuMOHsmol 12/10/2018
The bundled screws were too long. They damaged the windings and three of four motors have stopped working. I did not expect that the screws lying in the same bag with motors would need shortening! A complete disappointment!
4X 1102 11500KV 1-2S Borstelloze motor & 4 paren 1535 propeller voor RC Drone FPV Racing
US$19.99 US$40.35
0
aanbevelingen
Reacties (2)
DuMOHsmol 12/10/2018
I was pleasantly surprised to find that it has mounting holes for both 16x16 and 20x20 FCs.
Happymodel Toad90 90mm Micro 3K Carbon FPV Racing Frame Kit met CNC Aluminium Camera Mount voor RC Drone
US$14.26 US$21.38
1
aanbevelingen
Reacties (0)
DuMOHsmol 12/10/2018
Bought them for 90mm quad, but did not have chance to test because of broken motors.
4 Pairs Gemfan Hulkie 2040 2.0X4.0 PC 3-blade Propeller CW CCW voor 0806-1105 Motor RC FPV Racing Drone
US$4.19 US$9.99
0
aanbevelingen
Reacties (0)

DuMOHsmol Ooop, I guess I'm really late. My setup is:Frame: Kingkong 130GTMotors: D1106 6000KVESCs: Racerstar RS11APropellers: Gemfan 3035 3X3.5 BN 3-bladeBattery: ZOP Power 7.4V 850mah 70C 2SFlight controller: SP Racing F3 EVOHere is some fpv footage: https://www.youtube.com/watch?v=hzK-0hkHZpE

DuMOHsmol 26/02/2018
Great value for the price. I like how this frame can fit "larger" components normally used on 250mm quads, like a 600mw transmitter or 35x35mm flight controller. Here are some build tips: 1. The stock standoffs are pretty short, you might need longer ones. The standoffs here are for m2.5 screws. 2. The stock camera plate is for cameras with M12 lens, it doesn't hold a micro camera. Also, this plate will obviously not work with longer standoffs. Eventually, I had to 3D-print a camera holder. 3. There is a little PDB included (which is great!), but the 12V output does not provide 12V at all! I've even had 4.6V on nearly-discharged 2S battery (instead of 12V!). Do not use this PDB output at all, connect your 12V-demanding components directly to the battery voltage. The 5V outputs works fine.
KINGKONG / LDARC 130GT 130 mm carbon FPV-raceframe met 5V 12V PDB voor RC Drone
US$11.11 US$14.24
4
Reacties (2)
DuMOHsmol 26/02/2018
Works fine on Kingkong Q100 frame. However, It doesn't fit stock mounting latches on this frame, so I had to cut latches off and use the two-sided sticky pad.
Eachine 32bits F4 Gebroken Flight Control Board Gebaseerd op Openpilot CC3D Revolutio For Micro FPV Frame
US$16.99
0
aanbevelingen
Reacties (0)
DuMOHsmol 26/02/2018
Perfect for PCB mounting in quadcopters. There is also a nice plastic box with detachable sections.
Sulev™ M3NH1 M3 Nylon Schroef Zwart Zeskantmoer Nylon Assortimentsset voor PCB-afstand 300-delig
US$12.69 US$13.99
0
aanbevelingen
Reacties (0)
DuMOHsmol 26/02/2018
I couldn't find black ones in the shops around me, but banggood has rescued me once again.
100st Nylon Cable Zip Ties Wrap Bevestig Draad Zelfvergrendelende Kabel
US$2.49
0
aanbevelingen
Reacties (0)
DuMOHsmol 26/02/2018
It does glow in the dark, but it's dim and fades quickly! I've expected something a little bit longer and brighter.
Dancingnail Halloween Fluorescent Neon Pure Candy Color Lichtgevende Nagellak Non-toxic Glow In Dark
US$3.48
0
aanbevelingen
Reacties (0)
DuMOHsmol 26/02/2018
OK-ish syringes with extremely useful tips. I use these for soldering flux dispensing.
20CC-30CC Spuit SMT SMD PCB Soldeerpasta Lijm Lijm Vloeistof Dispenser
US$9.23 US$9.99
0
aanbevelingen
Reacties (0)
DuMOHsmol 26/02/2018
Bought this to make an upgrade for my EV800 goggles. Works fine!
Eachine ProDVR Pro DVR Video Audio Mini Recorder voor FPV Multicopters voor RC Drone FPV Racing
US$16.05 US$21.11
0
aanbevelingen
Reacties (0)
DuMOHsmol 26/02/2018
But be careful with the landing legs! Not every frame will fit these. Kingkong 130GT doesn't, so I've had to cut the landing gear off.
4 PC's KINGKONG / LDARC Universele motorsteunafdekking met landingsgestel voor 11-serie motoren RC Drone
US$3.11 US$3.73
0
aanbevelingen
Reacties (0)
DuMOHsmol 26/02/2018
At first I was really skeptical about these rubber standoffs, but they do work indeed! Once I've mounted my FC on these, the gyroscope has finally stopped from getting mad on Z-axis. I only wish there were some cheaper bulk offers, I would rather buy more of these in one time!
4 STKS Realacc M3 * 7 + 4.5 Flight Controller Anti-Vibratie Vaste Schroeven voor RC Drone FPV Racing
US$9.23 US$9.99
0
aanbevelingen
Reacties (0)
DuMOHsmol 26/02/2018
None of the reviews does mention the weight, so here it this. This PDB turned out to be a little heavy for my 130mm build, so I haven't used it yet. The soldering quality seems to be fine.
Lantian PDB Voedingsdistributiebord met 5V 12V 3A BEC-uitvoer voor CC3C Naze32 Upgrade versie voor RC Drone FPV Racing
US$11.54 US$11.99
0
aanbevelingen
Reacties (0)
DuMOHsmol 26/02/2018
Well, after replacing one broken motor, I found that these motors are quite fine! I still can't decide whether it was broken from the factory, or it was my fault, so I can't comment anything on the quality here. These motors seem to play fine with 3035x3 propellers and 3S battery, getting only slightly warm (but I haven't tested on full throttle yet, though). They also provide enough punch on 2S to make flying fun. Some people say that the shaft of these motors may back out, so I suggest drilling out the center hole on your propellers (a 1.6mm drill works perfectly). This way you won't apply force to the shaft when putting your props on and off.
Realacc Orange85 FPV Racer reserveonderdeel 1106 6000KV 1-3S borstelloze motor for RC Drone FPV Racing
US$8.99 US$9.64
1
aanbevelingen
Reacties (1)
DuMOHsmol 26/02/2018
The protectors are fine, but I wish there were no holes on the sides, as they clearly decrease the mud protection!
4 STUKS KINGKONG/LDARC Universele Motorafdekking Zwart voor 11 Series Motoren RC Drone
US$8.07 US$8.99
0
aanbevelingen
Reacties (0)

Jij bent de expert, kan je helpen?

We nodigen je van harte uit om je te abonneren op de Invite Answer-e-mail!

Als u zich abonneert, nodigen we u uit via e-mail om vragen te beantwoorden die mensen hebben over producten. Door je te abonneren, verdien je ook de "Behulpzame Badge "! U kunt zich op elk moment uitschrijven op de pagina met privacyinstellingen.

Help anderen en wees gelukkiger!

  • Abonneren

Over badges

Badges zijn gerelateerd aan de community en gebruikers verdienen badges door kwaliteitsinhoud te creëren, missies te voltooien of door deel te nemen aan speciale activiteiten. Specifieke mensen hebben ook hun eigen exclusieve badge.
CEO badge

de ceo-badge is alleen in handen van de baas van Banggood.

Badges die je kunt verdienen, komen binnenkort
  • Oké

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • Oké

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe