nzsnowman
Q: Exactly what cellular cellular Bands does the EU 4G module support?
gevraagd door nzsnowman op 2021-05-29 01:17:32
Q: how to connect to the camera with onvif what is the username and password?
gevraagd door fu33ybear op 2019-11-11 12:45:37
nzsnowman It does support ONVIF, but it took me a while to figure out the settings. Set up the camera on your DVR SW with it's DHCP assigned IP address (make this static-mapped on your DHCP server or home router to keep it permanent for the camera), set the ONVIF port to 80, the RTSP port to 554, set the username to 'admin' with a blank password, choose RTSP over UDP, and then select RTSP Input Stream number '2'. The camera will also respond to standard PTZ commands fro your DVR application. I use SecuritySpy on an Apple Mac myself.
2020-01-02 08:15:25 Nuttig (0)Q: what application is used on this camera?
gevraagd door adriano martins op 2019-11-30 07:44:30
nzsnowman You can use any ONVIF compatible security camera SW (or NVR/DVR) if you don't want to use the SaaS based CloudCam service. Set up the camera on your DVR SW with it's DHCP assigned IP address (make this static-mapped on your DHCP server or home router to keep it permanent for the camera), set the ONVIF port to 80, the RTSP port to 554, set the username to 'admin' with a blank password, choose RTSP over UDP, and then select RTSP Input Stream number '2'. The camera will also respond to standard PTZ commands fro your DVR application. I use SecuritySpy on an Apple Mac myself.
2020-01-02 08:14:42 Nuttig (0)
nzsnowman Yes, it does, but it took me a while to figure out the settings. Set up the camera on your DVR SW with it's DHCP assigned IP address (make this static-mapped on your DHCP server or home router to keep it permanent for the camera), set the ONVIF port to 80, the RTSP port to 554, set the username to 'admin' with a blank password, choose RTSP over UDP, and then select RTSP Input Stream number '2'. The camera will also respond to standard PTZ commands fro your DVR application. I use SecuritySpy on an Apple Mac myself.
2020-01-02 08:13:02 Nuttig (0)
nzsnowman It supports ONVIF, but it took me a while to figure out the settings. Set up the camera on your DVR SW with it's DHCP assigned IP address (make this static-mapped on your DHCP server or home router to keep it permanent for the camera), set the ONVIF port to 80, the RTSP port to 554, set the username to 'admin' with a blank password, choose RTSP over UDP, and then select RTSP Input Stream number '2'. The camera will also respond to standard PTZ commands fro your DVR application. I use SecuritySpy on an Apple Mac myself.
2020-01-02 08:11:24 Nuttig (0)
nzsnowman It took me a while to figure out the settings. Set up the camera on your DVR SW with it's DHCP assigned IP address (make this static-mapped on your DHCP server or home router to keep it permanent for the camera), set the ONVIF port to 80, the RTSP port to 554, set the username to 'admin' with a blank password, choose RTSP over UDP, and then select RTSP Input Stream number '2'. The camera will also respond to standard PTZ commands fro your DVR application. I use SecuritySpy on an Apple Mac myself.
2020-01-02 08:10:59 Nuttig (0)Q: What the password ONVIF? After swich on take password?
gevraagd door binbo op 2019-11-05 03:03:01
nzsnowman It took me a while to figure out the settings. Set up the camera on your DVR SW with it's DHCP assigned IP address (make this static-mapped on your DHCP server or home router to keep it permanent for the camera), set the ONVIF port to 80, the RTSP port to 554, set the username to 'admin' with a blank password, choose RTSP over UDP, and then select RTSP Input Stream number '2'. The camera will also respond to standard PTZ commands fro your DVR application. I use SecuritySpy on an Apple Mac myself.
2020-01-02 08:10:40 Nuttig (0)
nzsnowman Yes, it does, but it took me a while to figure out the settings. Set up the camera on your DVR SW with it's DHCP assigned IP address (make this static-mapped on your DHCP server or home router to keep it permanent for the camera), set the ONVIF port to 80, the RTSP port to 554, set the username to 'admin' with a blank password, choose RTSP over UDP, and then select RTSP Input Stream number '2'. The camera will also respond to standard PTZ commands fro your DVR application. I use SecuritySpy on an Apple Mac myself.
2020-01-02 08:10:10 Nuttig (1)Q: How can I view this camera on a PC. Manual do not give information.
gevraagd door Henry op 2019-09-25 09:09:25
nzsnowman Yes, you can, but it took me a while to figure out the settings. Set up the camera on your DVR SW with it's DHCP assigned IP address (make this static-mapped on your DHCP server or home router to keep it permanent for the camera), set the ONVIF port to 80, the RTSP port to 554, set the username to 'admin' with a blank password, choose RTSP over UDP, and then select RTSP Input Stream number '2'. The camera will also respond to standard PTZ commands fro your DVR application. I use SecuritySpy on an Apple Mac myself.
2020-01-02 08:09:45 Nuttig (1)Q: Does it support connection to NVR
gevraagd door ayedaraj op 2019-09-13 03:20:54
nzsnowman Yes, it does, but it took me a while to figure out the settings. Set up the camera on your DVR SW with it's DHCP assigned IP address (make this static-mapped on your DHCP server or home router to keep it permanent for the camera), set the ONVIF port to 80, the RTSP port to 554, set the username to 'admin' with a blank password, choose RTSP over UDP, and then select RTSP Input Stream number '2'. The camera will also respond to standard PTZ commands fro your DVR application. I use SecuritySpy on an Apple Mac myself.
2020-01-02 08:08:58 Nuttig (0)Q: Is this camera support ONVIF protocol
gevraagd door ayedaraj op 2019-09-13 03:22:58
nzsnowman Yes, it does, but it took me a while to figure out the settings. Set up the camera on your DVR SW with it's DHCP assigned IP address (make this static-mapped on your DHCP server or home router to keep it permanent for the camera), set the ONVIF port to 80, the RTSP port to 554, set the username to 'admin' with a blank password, choose RTSP over UDP, and then select RTSP Input Stream number '2'. The camera will also respond to standard PTZ commands fro your DVR application. I use SecuritySpy on an Apple Mac myself.
2020-01-02 08:08:13 Nuttig (0)
Saudade username/password No need to fill in
2019-12-30 12:49:27 Nuttig (0)We nodigen je van harte uit om je te abonneren op de Invite Answer-e-mail!
Als u zich abonneert, nodigen we u uit via e-mail om vragen te beantwoorden die mensen hebben over producten. Door je te abonneren, verdien je ook de "Behulpzame Badge "! U kunt zich op elk moment uitschrijven op de pagina met privacyinstellingen.
Help anderen en wees gelukkiger!
Thank you for subscribing! You have also earned a badge!
Thank you! Your answer will help ###name### and ###num### other people!
Check awaiting answers to see more people who need help.
Thank you! Your answer will help ###name### and ###num### other people!
Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!
We invite you to subscribe to our Invite Answer email!
Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.
The seller FDD-LTE:B1/B3/B5/B7/B8/B20 TDD-LTE:B38/B40/B41(120MHz)
2021-06-02 01:57:50 Nuttig (0)