Sasha
mijn inhoud
Alle berichten
Beoordelingen
Reacties
antwoorden
vragen

Alle berichten

Sasha 12/10/2020
Looking forward to use this on a non pro F3 Omnibus iNav build. 180A is ample & comes with leads to solder on. When using individual ESC’s & your flight controller doesn’t have a current meter on board, this is a must have.
Racerstar CS12 180A XT60 2-6S Stroomsensor met AMASS-stekker 10 cm lang 12/14 AWG voor RC Drone FPV Racen
US$5.24 US$15.99
1
aanbevelingen
Reacties (0)
Sasha 25/09/2020
Very hot & powerful. comes with 4 ends - 2.5/5/7.5/10mm (XT60 for size reference only) & a universal power plug adapter. A little bully but easily hand held. This machine has already paid for itself. I had an XJB-145 flight controller with a “No Gyro” problem after a crash. Applied flux around the solder joints & used the 5mm tip on the hottest & slowest setting. Fixed the broken solder joint causing the problem & saved me AU$60 (Gun cost AU$43 delivered). Used for heatshrink as well. I will be able to “liberate” many components for future projects without damage. A worthwhile tool.
Topshak TS-CD1 220V 450W 450 ℃ Draagbaar soldeer heteluchtpistool Desolder Power Nozzle Tool
US$44.88 US$55.99
3
aanbevelingen
Reacties (0)
Sasha 25/09/2020
Great little quad. F411 board - Nano 2 - TH1103 7000KV - 5A BlHeli_S - 25/100/200mW - SPI RX There are extra props & a little bag of prop bolts & a couple of spare parts (not many) & a USB charging board. Will take latest BetaFlight To bind to integrated rx, use BF CLI command - bind_rx_spi Had to reposition the FPV antenna so it was a little higher, still not high enough to clear the battery. Arm guards & battery holder from Thingiverse & remixed to include antenna holders. Plenty of reviews on YouTube. This is my 3rd Emax Baby/Tiny Hawk quad, they are all fantastic out of the box!
Emax Tinyhawk II Freestyle 2,5 Inch FPV Racing Drone BNF Frsky D8 F4 FC 5A ESC 1103 Motor Runcam Nano 2 Camera 200mW VTX
US$149.99 US$181.99
7
aanbevelingen
Reacties (0)
Sasha 07/10/2020
Great little connectors for a quick change of quad arms especially when switching from 5” to 7” on the fly. Keep in mind the weight. XT60 for size comparison.
50 paren 3,5 mm gouden kogelbananenstekkerstekker mannelijk en vrouwelijk voor ESC-batterijmotor
US$5.86 US$16.79
2
aanbevelingen
Reacties (1)
Sasha 12/10/2020
Great selection of sizes but don’t go very tall. Essential if you’re building especially attaching motors because frames for some reason never come with bolts/screws which are specific for their arm size. Spring & flat washers as well.
600 stuks M2 Carbon Stalen Hex Steeksleutel Knop Hoofd Allen Bout Met Zeskantmoeren Ringen Assortiment voor Runcam Foxeer FPV Camera RC Drone
US$11.85 US$19.19
0
aanbevelingen
Reacties (0)
Sasha 12/10/2020
Not tried this out yet. Components seem very sparse on the board. Intending to use in a JBX-145 V1. Be careful with ipex plugs, make sure you use something to keep it attached. Hot glue if you don’t have anything heat resistant as generally boards run hot at the higher settings. Smart audio 2.1 because smart audio wasn’t brilliant enough I guess. Antenna incl but you are better off getting an ipex to sma pigtail to make sure bumps & crashes don’t pop the plug off.
EWRF 7092TM Pro Slimme audio 2.1 5.8G 40CH 25/200/500mW Vermogen Verstelbare U.FL FPV Zender Ondersteunt Pitmode OSD Configuratie VTX voor RC Drone
US$19.99 US$23.99
0
aanbevelingen
Reacties (0)
Sasha 12/10/2020
Of you ever buy a quad, get spare props. These for the TinyHawk 2 Freestyle but also fit BabyHawk R (non 3 inch). Go like a rocket!
2 Pairs / 10 Paris Emax AVANRush AVAN 2.5x1.9 2519 2.5 Inch 3 Blade Propeller voor Tinyhawk II Freestyle / Babyhawk R RC Drone FPV Racing Multi Rotor
US$6.99 US$8.99
0
aanbevelingen
Reacties (0)
Sasha 12/10/2020
Fully isolated standoffs for flight controllers. Perfect for keeping noise out of your gyro & compliments rpm filters well. 2nd pic with Iflight on the left & Realacc on the right for comparison.
4 STKS Realacc M3 * 7 + 4.5 Flight Controller Anti-Vibratie Vaste Schroeven voor RC Drone FPV Racing
US$7.99 US$9.99
0
aanbevelingen
Reacties (0)
Sasha 12/10/2020
These dampening standoffs are essential for cutting out noise affecting the flight controller. Totally isolated. The second pic has the iFlight on the left & the Realacc on the right for comparison. They are quite tall at 7mm. Would be nice if they made them in 5 & 6mm as well.
4 STUKS IFlight M2 M2 * 6 + 4.5 / M3 M3 * 7 + 4.5 Vaste schroef voor trillingsdemping voor F3 F4 F7 Vluchtcontroller RC Drone FPV Racing
US$2.59 US$3.10
0
aanbevelingen
Reacties (0)
Sasha 12/10/2020
If you’re building stacks for small whoops etc, this is a must have. Great selection of sizes with nylon screws & nuts.
Suleve™ M2NH4 M2 Nylon Schroef Zwarte zeskantmoer Nylon Assortimentsset voor PCB-afstand 300-delig
US$13.99 US$16.99
0
aanbevelingen
Reacties (0)
Sasha 12/10/2020
Standard nylon standoff set for stacks. Very handy to have in any set up especially if you’re building. Keeping stacks compact requires finding the right size standoff & this set has 4 sizes plus nylon screws & nuts.
Sulev™ M3NH1 M3 Nylon Schroef Zwart Zeskantmoer Nylon Assortimentsset voor PCB-afstand 300-delig
US$10.99 US$13.99
0
aanbevelingen
Reacties (0)
Sasha 12/10/2020
Eachine VTX’s are good value. With smart audio, it makes life out in the field so much easier. Comes with pigtail & antenna. Pigtail you can see here is already installed in the frame. They are long to support a central stack but here I just looped it under the VTX with no problems. The MMX plugs are very tight & will prevent the antenna coming loose & frying your VTX. 30x30
Eachine TX1200 25/200/600/1000mW 5.8GHz 40CH FPV-zender LED-display Ondersteuning Slimme Audio OSD Pitmode MIC
US$29.00 US$69.99
0
aanbevelingen
Reacties (0)
Sasha 07/10/2020
Have the 5” frame. Ordered these to be able to swap to 7” out on the field.
1 PC Talystmachine 5 / 6 / 7 Inch Frame Deel 5mm Arm Plaat Koolstofvezel
US$8.99 US$10.99
0
aanbevelingen
Reacties (0)
Sasha 07/10/2020
Used before. Very rigid when shrunk. Good selection of sizes.
Soloop 328 stks 2:1 Polyolefin Halogeenvrije Krimpkous Hoes 5 Kleur 8 Maat:
US$10.99 US$13.99
0
aanbevelingen
Reacties (0)
Sasha 07/10/2020
Have the 5” frame. Ordered these to be able to swap to 7” out on the field.
1 PC Talystmachine 5/6/7 Inch Frame Deelarm Vaste plaat Koolstofvezel
US$8.99 US$10.99
0
aanbevelingen
Reacties (0)
Sasha 07/10/2020
Great long Antenna. No problems with obstructions. XT60 for size comparison.
iFlight Albatross 5.8GHz 3dBi Winst Omnirichtingale FPV-antenne SMA/RP-SMA RHCP 15cm voor RC-racer drone
US$7.00 US$27.99
0
aanbevelingen
Reacties (0)
Sasha 07/10/2020
1200KV Very strong magnets, very notchy. Not installed yet but not worried. Included screws are for a 4” arm so if using for 5” arm will need next size up screws. 5” min for a 7” quad to minimise wobbles. XT60 for size comparison.
Racerstar AirA 2508 BP Editie 4 ~ 6S 1200KV 1700KV Motor voor Mark4 5/6/7 inch Lange afstand RC Drone FPV Racing MultiRotors
US$25.99 US$31.99
0
aanbevelingen
Reacties (0)
Sasha 07/10/2020
Trusted brand. Semi rigid with a little flex.
2 paar DALPROP CYCLONE T7056C 7-inch Crystal 3-blade Propeller voor RC FPV Racing Drone
US$4.99 US$9.99
0
aanbevelingen
Reacties (0)
Sasha 07/10/2020
Not used yet. Using for a 2nd cam for ground view on a GPS INav build. Box does not specify specs but does have a non specific spec sheet but going by entry is the 505 version. XT60 for size comparison.
Mini 1200TVL 1.8mm M12 150 graden HD Super groothoek PAL / NTSC FPV-camera voor FPV RC Drone
US$11.99 US$14.39
0
aanbevelingen
Reacties (0)
Topshak TS-CD1 220V 450W 450 ℃ Draagbaar soldeer heteluchtpistool Desolder Power Nozzle Tool
US$44.88 US$55.99

Q: is this suitable to use with heat shrink tubing on cables

gevraagd door BG181844241 op 2020-09-06 03:19:04

Sasha Sure is. That’s the main use I have for it

2020-09-29 04:48:16 Nuttig (0)
Verzenden
antwoorden (3)

Jij bent de expert, kan je helpen?

We nodigen je van harte uit om je te abonneren op de Invite Answer-e-mail!

Als u zich abonneert, nodigen we u uit via e-mail om vragen te beantwoorden die mensen hebben over producten. Door je te abonneren, verdien je ook de "Behulpzame Badge "! U kunt zich op elk moment uitschrijven op de pagina met privacyinstellingen.

Help anderen en wees gelukkiger!

  • Abonneren

Over badges

Badges zijn gerelateerd aan de community en gebruikers verdienen badges door kwaliteitsinhoud te creëren, missies te voltooien of door deel te nemen aan speciale activiteiten. Specifieke mensen hebben ook hun eigen exclusieve badge.
CEO badge

de ceo-badge is alleen in handen van de baas van Banggood.

Badges die je kunt verdienen, komen binnenkort
  • Oké

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • Oké

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe