Beste deals voor Houtklem,VEIKO Houtbewerkingslijn Scriber - Banggood Netherlands online winkelen

irenebrowning

mijn inhoud: Alle berichten; Beoordelingen; Reacties; antwoorden; vragen

Alle berichten

irenebrowning Ihad the same problem. I will have to sand down the knurled posts. It did not fit on either version of the MFT I have.

BG111737201 29/10/2021

Package arrived in very good condition. The clamp is well protected in the foam and carton box. The solid piece of aluminium gives a good first impression. The lever which is acting as a cam for different pressure levels has a bit of friction with the pressure area. I put some PTFE and is ok. The cam is running perfectly parallel to the pressure plate which means pressure is well distributed. One of the 2 bolts is a bit proud of the pressure plate and it will mar the workpiece if in contact. It needs filing. This means taking the other 4 bolts off connecting the steel spring to the main body. The cross hatched pillar is sligtly bigger than 20mm (just shy of 20.1mm) as can be seen in the vernier reading. I guess it will need a bit of light sanding down.

ENJOYWOOD Aluminiumlegering Houtbewerkings MFT Tafel Klem Houtbewerkings Desktoppers Klaar voor Snelle Handmatige Persplaat Houtbewerkingsmachine Accessoires DIY Klemmen

22,36€ 37,28€

7

Reacties (4)

irenebrowning 31/12/2021

If you read the comments on Hooked on Wood, you will note that there was a complaint that the ruler did not stay square to the edge, I have noted the same thing. Only time will tell how this is going to work out in my shop or if there is a fix for this. This may only be a problem with the longer ruler.

VEIKO TS Precisie Houtbewerking Lijn Schrijver Markering T Liniaal Aluminium Legering Gat Positionering Markering Gauge 300/400/500/600/760 mm

27,96€ 37,28€

1

Reacties (0)

Aluminiumlegering 90 graden houtbewerking precisiehaak metrisch imperiaal type haakse liniaal Hoogtemeetliniaal Tekening- en markeringssjabloon

13,97€ 16,77€

Q: What is the dimension of the holes?

gevraagd door irenebrowning op 2021-12-18 12:13:12

Samppa78 Holes diameter is 10mm for each hole.

2021-12-18 01:23:17 Nuttig

Verzenden

antwoorden (1)

irenebrowning 01/10/2020

Seems well made if not a bit pricey.

DIN875-2 100x70mm 90° Hoek Haakvierkant Brede Basis Meten Houtbewerking Gereedschap

13,97€ 37,28€

0

Reacties (0)

irenebrowning 01/10/2020

Accurate. Sure it will come in handy for checking 45 degree angles.

ENJOYWOOD Roestvrijstalen 45-graden verstekhoekhoek liniaal met brede basis voor houtbewerking meetgereedschap

13,04€ 37,28€

0

Reacties (0)

irenebrowning 28/09/2020

Fit well into my original Festool MFT table. Nicely packaged. Seems to be a quality product and would recommend.

Wnew 2PCS/4PCS MFT Tafelklemmen Bank Hond Klemmen Quick Ratchet Release Speed Squeeze Woodwofking Clamp voof Werkbank 20mm Dog Hole

43,80€ 46,60€

0

Reacties (0)