Andy
mijn inhoud
Alle berichten
Beoordelingen
Reacties
antwoorden
vragen

Alle berichten

150W DL24 2,4 inch DC USB Tester Elektronische Belasting APP 18650 Batterij Capaciteitsmonitor Ontlading Lading Vermogensmeter Leverancier Checker met Kleurendisplay 4-draads Terminal
US$52.99 US$63.99

Q: Is it possible to use this in 4 wire testing mode (with separate wires testing the battery source voltage)? This is really important otherwise all the measurements will be off, and there will be an inaccuracy caused by voltage sag/droop over the load wires.

gevraagd door Andy op 2020-07-01 07:09:52

Lactoscope Yeah，that is OK.

2020-07-02 12:47:27 Nuttig (0)
Verzenden
antwoorden (1)
Andy 05/02/2018
Although you can only store the smaller drivers in the handle (four slots) it's still very handy. The hex drivers seem to be very hard and fit perfectly into my 2mm and 1.5mm hex screws with no slop meaning that I can screw the screws without worrying about stripping the head which my old drivers were doing. Very handy tool, It's nice to have other sizes in the handle, even if not all of them can fit in there. But if you have a tool bag or something then the other attachments can go there. The tips are held on magnetically and the magnets feel strong and sturdy.
8 in 1 Hex socket driver Hexagon schroevendraaier Set voor RC-modellen
US$15.99 US$19.19
1
aanbevelingen
Reacties (0)
150W DL24 2,4 inch DC USB Tester Elektronische Belasting APP 18650 Batterij Capaciteitsmonitor Ontlading Lading Vermogensmeter Leverancier Checker met Kleurendisplay 4-draads Terminal
US$52.99 US$63.99

Q: Hi, Can you please release the source code for the logging software? It is in desperate need of improvement. EG inability to handle different size screens/resolutions, ability to work with non-Chinese characters etc. This product seems good, it would be a pity for the software to be its biggest problem, and there are many who would gladly improve the software for free if it were open-source. Can you do that?

gevraagd door Andy op 2020-05-08 06:01:44

Lord_jen For the time being, no source code is provided,sorry.

2020-05-08 09:20:22 Nuttig (0)
Verzenden
antwoorden (1)
SKYSTARS TA LON X110 110mm 2.5inch 3D Print Carbon Fiber RC Drone FPV Racing Frame Kit
US$19.99 US$23.99

Q: What are the other 3D printed parts used for (featured in the pictures, such as the square things)?

gevraagd door Andy op 2019-09-21 05:18:15

Scott Those are battery bays. You screw one down to the bottom of the frame and a battery, of that inner size, slides in and is held snug. Awesome way to go. GnarlyFPV came out with that first, I think. If it's like there's, you can switch the bays out with one screw in the field and go to a different size battery.

2019-10-02 06:05:29 Nuttig (0)
Verzenden
antwoorden (1)
Andy 05/02/2018
I'd say these are not great quality. The plastic does not seem well made, and in one of these plugs part of the shroud was not even formed properly (Almost like they ran out of plastic during the injection moulding process). I'd suggest buying better quality plugs if you can.
5Pairs/10stuks XT60 Stekker Mannelijke Vrouwelijke Kogelconnectoren voor RC Drone Multirotor FPV Racing Batterij
US$2.91 US$11.99
1
aanbevelingen
Reacties (1)
Andy 05/02/2018
The solder is good quality. I've tried to upload a photo but I don't think it's working but anyway there is a good amount of flux in the core and the solder is shiny when finished with it. Happy with the product. Reasonable delivery time and quality solder.
15G Tin Lead Solder Wire Tube Flux 60/40 Bedekt Solderen Elektrische Hobby DIY
US$6.99 US$8.99
1
aanbevelingen
Reacties (0)
Andy 25/09/2018
I'm very pleased with this. I have a few bike mount holders, some much more expensive, but this is my favourite! It's simple, it's easy to remove the torch if you are parking your bike anywhere, and it just works. No hassle. I wish it was back in stock so I could get another one or two of these for my other bikes.
360 graden fiets fiets fakkelhouder met clipklem verstelbare lichtlamp zaklantaarnhouder
US$6.99 US$8.99
0
aanbevelingen
Reacties (0)
Andy 25/09/2018
The velcro on this mount is too large, cumbersome, and useless. It doesn't appear like the strap in the photo at all. The only torch it would fit is one that is about the diameter of your forearm. But the velcro is way way too big for normal torches like the one pictured in the photo. Pretty much money down the drain. Don't bother buying this, it's hopeless.
Bike Front Torch Mount LED Lenslamp Clamp Adjust Holder Clip Bracket
US$2.57
0
aanbevelingen
Reacties (1)
Andy 14/09/2018
I have this and the uruav 65, I prefer this one. Motors sound smoother. Battery life of the included batteries is terrible though :-(
Happymodel Snapper6 65mm Micro 1S borstelloze FPV Racing RC Drone met F3 OSD BLHeli_S 5A ESC BNF
US$77.24 US$109.40
0
aanbevelingen
Reacties (0)
Andy 14/09/2018
I purchased these to replace the stick ends on my QX7. Problem is that they do not fit the screw size on the sticks on the QX7! So money wasted down the drain. I guess I just assumed there was a standard size and they would just be able to screw straight on, but no. I wish I realised this before wasting my money. Is there any way to get these to work on standard QX7 gimbals or sticks? I have these on a QX7s and they feel magnificent there.
2 STKS M4 Aluminium Gimbal Stick Uiteinden voor FrSky Taranis Horus SE X9E X12S Zender
US$20.99 US$22.99
0
aanbevelingen
Reacties (1)
Andy 19/08/2018
Great for screwing on smaller props
5 stuks Gofly-RC M5 aluminium motor schroefmoeren Nylon inzetstuk zelfsluitend CW/CCW voor RC FPV race drone
US$8.99 US$10.99
0
aanbevelingen
Reacties (0)
Andy 19/08/2018
It'll read the values of micro 1s batteries reasonably accurately.
AOKoda AOK-041 1S Lithium Batterij Tester Checker voor JST MOLEX mCPX MCX Plug Batterij
US$9.99 US$11.99
0
aanbevelingen
Reacties (0)
Andy 13/06/2018
This was a gift for my son and it is awesome. I didn't realize the charger was built into the plastic case itself which is brilliant + it can charge 3 batteries at a time off usb (or 6 at a time from xt60). Comes with all the spare parts he'll need. Bound up to his Taranis no problem and flies great. Gets about 3 minutes of fly time from the batteries. He loves it!
KINGKONG / LDARC TINY6X 65 mm Racing FPV RC Drone met 716 geborstelde motoren op basis van F3 vluchtcontroller
US$64.23 US$75.69
0
aanbevelingen
Reacties (0)
Andy 13/06/2018
Works okay as a parallel charge board but might have been better getting one that has individual charge lanes for each battery.
1S 3.7V Lipo Batterij Evenwichtige Oplaadadapter Board voor IMAX B6 Lader
US$10.99 US$13.99
0
aanbevelingen
Reacties (0)
Andy 13/06/2018
Good quality XT30 connectors, no problem with these.
10X Amass XT30UPB XT30 UPB 2mm Stekker Mannelijk Vrouwelijk Kogelconnectoren Pluggen Voor RC Drone Vliegtuig Batterij
US$10.99 US$22.79
0
aanbevelingen
Reacties (0)
Andy 13/06/2018
Seem reasonable quality in a nice case
Suleve™ M3CH3 M3 Koolstofstalen inbusbout 4-25 mm bolkop zeskantschroefbout metrisch 240-delig
US$11.99 US$14.99
0
aanbevelingen
Reacties (0)
Andy 13/06/2018
Seem reasonable quality.
Suleve ™ CS1 10st Koolstofstalen zelfborgende zeskantmoer Nylon Plaats borgmoer M2 / M2.5 / M3/M4/M5/M6/M8
US$2.32 US$3.99
0
aanbevelingen
Reacties (0)
Andy 13/06/2018
Seem reasonable quality in a nice case
Suleve ™ MXCH2 240-delig M2 / M2.5 / M3 Dopschroeven met binnenzeskant Koolstofstaal Assortimentset
US$13.99 US$16.99
0
aanbevelingen
Reacties (0)
Andy 03/05/2018
They are only made of foam, which isn't very premium. But, as far as foam inserts go, these are pretty good actually. They are nice and thick and fit the goggles well. They also came with velcro with a sticky back to stick it to the goggles if they don't already have velcro on there - a nice addition.
1 stuk Aomway 10 mm / 13 mm / 15 mm dikke sponsschuimpads voor Commander FPV-bril
US$6.28 US$7.54
0
aanbevelingen
Reacties (0)
Andy 19/02/2018
I am quite pleased with how this bag turned out, it's great for storing or charging a bunch of LiPo batteries in it. You could store a dozen 1300mAh batteries, or use it for charging (with longer wires). The bag is surprisingly sturdy given the flimsy nature of the material, it seems to hold it's shape well even with lots of batteries. They used lots of velcro to attach the flaps so that it has a nice sturdy feel to it when carrying batteries around. I am considering getting another one I'm so pleased with it. It's much better than the LiPo charge bags I've seen around since this is not much bigger in area but has much bigger volume.
ARRIS brandvertragende LiPo-batterij draagbare veiligheidszak 215*155*115mm
US$5.00 US$10.99
0
aanbevelingen
Reacties (0)

Jij bent de expert, kan je helpen?

We nodigen je van harte uit om je te abonneren op de Invite Answer-e-mail!

Als u zich abonneert, nodigen we u uit via e-mail om vragen te beantwoorden die mensen hebben over producten. Door je te abonneren, verdien je ook de "Behulpzame Badge "! U kunt zich op elk moment uitschrijven op de pagina met privacyinstellingen.

Help anderen en wees gelukkiger!

  • Abonneren

Over badges

Badges zijn gerelateerd aan de community en gebruikers verdienen badges door kwaliteitsinhoud te creëren, missies te voltooien of door deel te nemen aan speciale activiteiten. Specifieke mensen hebben ook hun eigen exclusieve badge.
CEO badge

de ceo-badge is alleen in handen van de baas van Banggood.

Badges die je kunt verdienen, komen binnenkort
  • Oké

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • Oké

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe