Alle berichten

BG116175023 عادة ما تكون بطارية الليثيوم. هي أفضل لتحمل الحرارة الشديدة. وعمر أطول.

2021-11-18 01:20:30 Nuttig (1)
Verzenden
antwoorden (10)

Q: What's the current handling of these strips?

gevraagd door wingerr op 2020-05-16 06:46:22

laszlo The 0.15*8mm approx 25Amp

2020-05-24 06:18:14 Nuttig (6)
Verzenden
antwoorden (3)

Q: do you have selection of square, circle or triangle?

gevraagd door wingerr op 2021-10-11 07:57:21

BG391652144 yes they send random

2021-11-19 09:36:18 Nuttig (0)
Verzenden
antwoorden (1)

wingerr it's more for speed spinning the screws after you first break them loose manually, and spinning them back in before doing the final tightening by hand torque. it's not for any heavy duty purposes if you want to rely on it to do all the work; for small precision machine screws it's fine.

2021-10-27 09:05:22 Nuttig (0)
Verzenden
antwoorden (10)

wingerr 3 N-m is 2.2 ft-lbs, this is way more than that little motor will be able to drive. That's probably the limit they claim from manual drive, before the internal parts break.

2021-10-27 08:58:44 Nuttig (0)
Verzenden
antwoorden (14)

Q: Is the facemask made it pliable silicone or just plastic?

gevraagd door wingerr op 2020-04-03 02:43:34

Steve im5not sure how to tell the difference but it feels a little maliable. flexible and softer than any hard-set plastic

2021-09-15 07:55:58 Nuttig (0)
Verzenden
antwoorden (2)

wingerr the appropriate size butt plug must be selected for optimum effectiveness

2021-09-13 08:54:45 Nuttig (0)
Verzenden
antwoorden (3)

wingerr it only claims 250W max. strictly speaking, they just set a limit above which the panel will never go. Safe to say that the panel will never exceed 250W. Now if they claimed 5W min, then someone could complain that it isn't meeting spec. Truth in Deception..

2021-08-23 11:18:23 Nuttig (0)
Verzenden
antwoorden (9)

Q: why does mine start fading after 10 seconds? I have had it for 3 days?

gevraagd door BG174534132 op 2020-11-04 02:05:05

wingerr Mine failed completely, may have overheated and damaged the laser diode. Don't turn it on for more than just a few seconds at a time or it will be destroyed. It would be nice if it automatically turned off after 5 seconds even if you kept holding the button down, to protect against failure.

2021-03-08 01:27:39 Nuttig (0)
Verzenden
antwoorden (6)