Alle berichten

Kandred Thiscan happen if you flash the wrong firmware for the board and you end up with intermittent NOGYRO errors which cause the quad to fail to arm. Make sure you flash OMNIBUSF4 (and not OMNIBUSF4SD).

Krirken 23/10/2018
2
Reacties (2)

Q: Can it record on 1280x720 or not?

gevraagd door AdelDba op 2018-06-17 05:10:51

Kandred Mine records MJPEG video at 1280x720 which is much higher than the 480i (NTSC) or 576i (PAL) composite video from the FPV camera so it must be up-scaling the video frames.

2018-06-23 05:07:57 Nuttig (0)
Verzenden
antwoorden (1)

Kandred The EWRF 7086TM3 does not support SmartAudio. It only supports changing channels via an analog PWM signal from your receiver. Only the newer EWRF e708TM3 and e7086TM3 (note the small 'e' prefix) supports SmartAudio.

pitersonfascist 24/03/2018
1
Reacties (1)

Kandred According to the manual here: https://drive.google.com/file/d/0B9HX28GOnHgEVGp1RVhsanhGZDQ/view, the EWRF 7086TM3 is an older version of the VTX which does not support SmartAudio. You need either the EWRF e708TM3 or e7086TM3 (note the small 'e' prefix). Like you I learned this the hard way. The product documentation is really very poor.

2018-05-14 03:26:51 Nuttig (0)
Verzenden
antwoorden (1)