Beste deals voor TransTEC Frog Lite frame van 218 mm - Banggood Netherlands online winkelen

rspenc29

mijn inhoud: Alle berichten; Beoordelingen; Reacties; antwoorden; vragen

Alle berichten

rspenc29 09/09/2018

This is a really good looking frame and feels very strong when assembled. However, it didn't come with enough screws for assembly and some of the screws it did come with didn't even have any threads. Also due to the thickness of the arms, you have to be careful with motor installation. Most motors come with a set of short screws and a set of longer screws. In my case, the short screws were too short. They will only grab the first few threads in the motor housing and strip them out. The longer screws are too long. They will cause the motor to short on the frame and if you try to power them up without a current limiter then you will probably smoke your esc or motor. If you add the red caps between the longer screws and arms then that should give you enough room where it doesn't short the motors to the frame. But you wont be able to tighten them down much because it's soft plastic and the screw heads will just crush the plastic. So I had to get some washers to install between the screws and plastic. That, along with some blue loctite, and I feel like I have a pretty solid build. If you don't want to use the plastic caps then you will probably need several washers on each motor screw or just different length screws that probably didn't come with your motors. I'm very happy with the final result but damn it, include at least enough screws to assemble it and even some extras in case some get stripped or lost.

TransTEC Frog Lite 218mm Carbon 4 mm Arm X Frame DIY Frame Kit RC Drone FPV Racing Multi Rotor

US$37.99 US$45.99

0

Reacties (0)