Tassos You may use up to 2 airplane ESC. The FC can handle up to 90A continuous current. Each ESC must be soldered directly onto the board, since they are powered by the board. There is a diagram showing where the power and the ground pads are located. Lastly, each BEC wire must be plugged onto a UART pin, except for the red wire.

Tassos No,it won't. This device is a monitor with an embedded 5.8GHz analog signal receiver. To receive this signal you need a 5.8GHz analog signal transmitter (VTX). DJI Phantom uses either 2.4GHz or 5.8GHz analog signal which is conveyed DIGITALLY, thus requiring a device that can receive 2.4GHz or 5.8GHz digital signal (e.g. modern smartphones, tablets).

Tassos Female RP-SMA

Tassos When sunscreen is closed: 124mm x 75mm x 27mm (Width x Height x Thickness) When sunscreen is open: 124mm x 75mm x 85mm (Width x Height x Thickness) These are the dimensions of the outer case.

Tassos No,non puoi connettere questo drone a un telefono Android.

Tassos This device is an analog video signal receiver, that converts analog video signal to digital video image with the aid of android software like FPViewer. It connects to android phone via mini usb port and streams image. It requires an analog video signal transmitter and an analog camera (known as FPV camera) in order to produce a signal for the receiver to receive and finally to stream image. These systems are usually implemented by RC enthusiasts.

Tassos You need a battery (e.g. 1S LiPo) with "Micro JST" connector (white color), NOT "Normal JST" (red color). As you can see in the product's images, the camera has the "male" version and the battery should have the "female" version. I hope this helps.