great little motor, the description wasn’t accurate though. the motor shaft is 4mm not 3mm as per the diagram in the description.

great little motor, the description wasn’t accurate though. the motor shaft is 4mm not 3mm as per the diagram in the description.

great little motor, the description wasn’t accurate though. the motor shaft is 4mm not 3mm as per the diagram in the description.

motor size confirmed! it's a 2830. but saying that iam very pleased with my purchase,very high quality for the price .

motor size confirmed! it's a 2830. but saying that iam very pleased with my purchase,very high quality for the price .

motor size confirmed! it's a 2830. but saying that iam very pleased with my purchase,very high quality for the price .

I tested this motor (1120 KV) when it arrived. It seems very well made and runs smoothly. My bench test using a 3S battery and 30 mAp ESC resulted in 150 Watts/12 mAp using a 8x5 prop and 220 watts/18 mAp using a 9x7 prop. I tested 10 inch and 11 inch props and found that the motor and ESC became very hot, so I would not recommend using larger than a 9" prop. Seems suitable for a 28 oz or 42 oz models.

I tested this motor (1120 KV) when it arrived. It seems very well made and runs smoothly. My bench test using a 3S battery and 30 mAp ESC resulted in 150 Watts/12 mAp using a 8x5 prop and 220 watts/18 mAp using a 9x7 prop. I tested 10 inch and 11 inch props and found that the motor and ESC became very hot, so I would not recommend using larger than a 9" prop. Seems suitable for a 28 oz or 42 oz models.

I tested this motor (1120 KV) when it arrived. It seems very well made and runs smoothly. My bench test using a 3S battery and 30 mAp ESC resulted in 150 Watts/12 mAp using a 8x5 prop and 220 watts/18 mAp using a 9x7 prop. I tested 10 inch and 11 inch props and found that the motor and ESC became very hot, so I would not recommend using larger than a 9" prop. Seems suitable for a 28 oz or 42 oz models.

Nice little motor. The manufacturing seems correct compared to what I have already seen on other ones of the same price range. My only concern is the diameter of the screws fixing the prop holder on the body, which seems to me a little small (M2). I imagine that they has been correctly sized for the use of this small motor.

Nice little motor. The manufacturing seems correct compared to what I have already seen on other ones of the same price range. My only concern is the diameter of the screws fixing the prop holder on the body, which seems to me a little small (M2). I imagine that they has been correctly sized for the use of this small motor.

Nice little motor. The manufacturing seems correct compared to what I have already seen on other ones of the same price range. My only concern is the diameter of the screws fixing the prop holder on the body, which seems to me a little small (M2). I imagine that they has been correctly sized for the use of this small motor.

size of the motor does not correspond to description. size is 2830 in place of 2836. not tested. trying to get a solution with banggood.

size of the motor does not correspond to description. size is 2830 in place of 2836. not tested. trying to get a solution with banggood.

size of the motor does not correspond to description. size is 2830 in place of 2836. not tested. trying to get a solution with banggood.

Estupendo motor trabaja muuuy bien

Estupendo motor trabaja muuuy bien

Estupendo motor trabaja muuuy bien

tested and it works good.

tested and it works good.

tested and it works good.

I set this motor (1120kV version) to work in a Multiplex Blizzard on a 10x6" prop and 3s 2200 lipo. Static current draw approx. 24A. This may seem like a low power setup for the blizzard, but the thing still climbs vertically if needed (although 60° ascend angle gives better height gain), and provides 30+ minutes of flight fun. The motor runs very smooth and quietly. Only donwside is the somewhat stiff cable output - no problem in the Blizzard, which has plenty of space for much larger motors, but may be a hinderance in smaller fuselages. Considerung to get anther one of these to revive my ancient Ikarus Trainer 25.

I set this motor (1120kV version) to work in a Multiplex Blizzard on a 10x6" prop and 3s 2200 lipo. Static current draw approx. 24A. This may seem like a low power setup for the blizzard, but the thing still climbs vertically if needed (although 60° ascend angle gives better height gain), and provides 30+ minutes of flight fun. The motor runs very smooth and quietly. Only donwside is the somewhat stiff cable output - no problem in the Blizzard, which has plenty of space for much larger motors, but may be a hinderance in smaller fuselages. Considerung to get anther one of these to revive my ancient Ikarus Trainer 25.

I set this motor (1120kV version) to work in a Multiplex Blizzard on a 10x6" prop and 3s 2200 lipo. Static current draw approx. 24A. This may seem like a low power setup for the blizzard, but the thing still climbs vertically if needed (although 60° ascend angle gives better height gain), and provides 30+ minutes of flight fun. The motor runs very smooth and quietly. Only donwside is the somewhat stiff cable output - no problem in the Blizzard, which has plenty of space for much larger motors, but may be a hinderance in smaller fuselages. Considerung to get anther one of these to revive my ancient Ikarus Trainer 25.

Nice motor. It performs better than I expected - quiet, smooth and runs cool. It is fitted in my Phoenix 2000 electric glider and with a 10x7 folding prop it has a good climb rate and good duration on a 3S lipo. It is better than the SK3 motor than was fitted previously

Nice motor. It performs better than I expected - quiet, smooth and runs cool. It is fitted in my Phoenix 2000 electric glider and with a 10x7 folding prop it has a good climb rate and good duration on a 3S lipo. It is better than the SK3 motor than was fitted previously

Nice motor. It performs better than I expected - quiet, smooth and runs cool. It is fitted in my Phoenix 2000 electric glider and with a 10x7 folding prop it has a good climb rate and good duration on a 3S lipo. It is better than the SK3 motor than was fitted previously

ok-gut

ok-gut

ok-gut