Fantastischer Bausatz der richtig Spaß macht! Entgegen der Bauanleitung sollte man längere Schrauben für die Kardanwellen nehmen - die 1005er aus dem Bausatz. Ich habe den Radstand mit den Links vom OH35P01 etwas verlängert (nur an der Vorderachse). Ich finde, dass der Brouncer damit richtig gut aussieht! Alles in allem ein super gemachter Bausatz - das Endergebnis ist hervorragend! ----------- Fantastic kit that is really fun! Contrary to the instructions, you should use longer screws for the cardan shafts - the 1005s from the kit. I have lengthened the wheelbase with the links of the OH35P01 a little (only on the front axle). I think the Brouncer looks really good with it! All in all a well-made kit - the end result is excellent!

Fantastischer Bausatz der richtig Spaß macht! Entgegen der Bauanleitung sollte man längere Schrauben für die Kardanwellen nehmen - die 1005er aus dem Bausatz. Ich habe den Radstand mit den Links vom OH35P01 etwas verlängert (nur an der Vorderachse). Ich finde, dass der Brouncer damit richtig gut aussieht! Alles in allem ein super gemachter Bausatz - das Endergebnis ist hervorragend! ----------- Fantastic kit that is really fun! Contrary to the instructions, you should use longer screws for the cardan shafts - the 1005s from the kit. I have lengthened the wheelbase with the links of the OH35P01 a little (only on the front axle). I think the Brouncer looks really good with it! All in all a well-made kit - the end result is excellent!

Fantastischer Bausatz der richtig Spaß macht! Entgegen der Bauanleitung sollte man längere Schrauben für die Kardanwellen nehmen - die 1005er aus dem Bausatz. Ich habe den Radstand mit den Links vom OH35P01 etwas verlängert (nur an der Vorderachse). Ich finde, dass der Brouncer damit richtig gut aussieht! Alles in allem ein super gemachter Bausatz - das Endergebnis ist hervorragend! ----------- Fantastic kit that is really fun! Contrary to the instructions, you should use longer screws for the cardan shafts - the 1005s from the kit. I have lengthened the wheelbase with the links of the OH35P01 a little (only on the front axle). I think the Brouncer looks really good with it! All in all a well-made kit - the end result is excellent!

One thing to note about this Orlandoo is that banggood does not sell it's tires separate, and the upgrade rims are all to small for it, as it has bigger rims then all other ornadoo's. also the standard rim Weights does not fit, so make sure to choose the ones saying "18mm outer Diameter" !!! Most photos I took is after pimping it out. Added plastic panels to it with glue. I cut it from an old RC body. I drilled a 15mm hole in standard rims to fit inside them other orlandoo rims (giving it +-3.5mm wider Axles that helps it from rolling over). Also added custom Shocks i made from Nine eagle chopper parts. Changed the position of the arms holding axles as well and removed the center piece where it was held to give it more clearance. The shock towers at the front was also made out of helicopter spares, it was part of the servo in Nine eagles mini chopper.

One thing to note about this Orlandoo is that banggood does not sell it's tires separate, and the upgrade rims are all to small for it, as it has bigger rims then all other ornadoo's. also the standard rim Weights does not fit, so make sure to choose the ones saying "18mm outer Diameter" !!! Most photos I took is after pimping it out. Added plastic panels to it with glue. I cut it from an old RC body. I drilled a 15mm hole in standard rims to fit inside them other orlandoo rims (giving it +-3.5mm wider Axles that helps it from rolling over). Also added custom Shocks i made from Nine eagle chopper parts. Changed the position of the arms holding axles as well and removed the center piece where it was held to give it more clearance. The shock towers at the front was also made out of helicopter spares, it was part of the servo in Nine eagles mini chopper.

One thing to note about this Orlandoo is that banggood does not sell it's tires separate, and the upgrade rims are all to small for it, as it has bigger rims then all other ornadoo's. also the standard rim Weights does not fit, so make sure to choose the ones saying "18mm outer Diameter" !!! Most photos I took is after pimping it out. Added plastic panels to it with glue. I cut it from an old RC body. I drilled a 15mm hole in standard rims to fit inside them other orlandoo rims (giving it +-3.5mm wider Axles that helps it from rolling over). Also added custom Shocks i made from Nine eagle chopper parts. Changed the position of the arms holding axles as well and removed the center piece where it was held to give it more clearance. The shock towers at the front was also made out of helicopter spares, it was part of the servo in Nine eagles mini chopper.