Klantbeoordelingen

Schrijf een beoordeling
  • Alle beoordelingen(106)
  • Afbeeldingen
  • Videos
  • Ster
    • Ster(106)
    • 5 Ster(81)
    • 4 Ster(11)
    • 3 Ster(6)
    • 2 Ster(3)
    • 1 Ster(5)
Sorteren op:
Top recensie
  • Top recensie
  • Meest nuttig
  • meest recent
Recensies alleen uit uw land (United States)
|
Toon origineel

Een deel van de recensie is automatisch vertaald.

  • 22/09/2015

    This kit is another great buy from Banggood! As usual, a high quality, gold plated through hole, fibre glass PCB. The RF circuitry is pre installed which means that there's no difficulty winding coils and getting the turns number correct. All high qulaity components make this a breeze to construct in just a couple of hours. A quick adjust at switch on and I was listening to loads of aircraft conversations. A great kit and well worth the money.

    Reacties (2)
    Toon origineel
  • 15/01/2016

    The PCB for this receiver was a little rough, and needed to be thoroughly cleaned before assembly could begin. There were two wrong components supplied, but I keep a good stock of parts, so this was only a minor annoyance. The aerial socket didn't fit the holes provided for it on the PCB, but I used a short piece of coax to a panel-mounted socket instead. I have built this into a small diecast case, with a rechargeable battery pack for power, and have added a frequency counter to display the received frequency. This is now a superb little airband receiver, and is able to receive the commercial bugging devices around 135MHz!

    Reacties (3)
    Toon origineel
  • 17/03/2017

    Wanted to build a radio so I could listen to aircraft. Had no issues with the kit. Arrived on time. I did locate a case for it so it had a more finished look. Very fun project.

    Reacties (4)
    Toon origineel
  • 23/09/2015

    The kit can be made in a long evening and there are no surprises as everything fitted. I used a signal generator to align it but it was simple to do and can be done without one. In use it is sensitive and stable. Excellent value for money.

    Reacties (2)
    Toon origineel
  • 14/09/2015

    The kit arrived with the inductors and capacitors for the rf bandpass pre-installed. The board is labeled well. I will provide additonal information after assembly and test.

    Reacties
    Toon origineel
  • 02/04/2019

    Product as described, fast delivery and good quality, Price/Quality is very good. A very nice DIY kit delivered without any instruction....but you can find all the needed information on the internet. PCB is very high class quality with the coils already printed directly on the PCB.(New version).Easy to adjust. Some components (2 resistors and 3 capacitors) were missing...but i've had them in stock. The receiver worked directly after assembling....only needed to adjust 2 coils. I've tested the receiver with a distance about 30Km from the airport. Used a regulating dipole Antenna on my kitchen table to receive the aircrafts(see pictures). Minus point are the splashing squelch and the frequentie potmeter(better to mount a 10turn potmeter). Recommended !!!

    Reacties
    Toon origineel
  • 15/08/2016

    I enjoyed assembling of this nice kit, easy to tune. I am a little bit far away from north airpport at Paris, but i can listen conversations berween pilot and airport dipatcher. I will integrate it in a more adequate and mobile box. Thank you Banggood.

    Reacties
    Toon origineel
  • 05/04/2016

    very simple and nice reciever easy to build working fine for acars tracking

    Reacties
    Toon origineel
  • 09/09/2015

    The kit is easy to assemble, there is no difficulty, no trap is quite clear. It takes about five hours to weld all components. The result is amazing, sensitivity is good, the stability is good and the selectivity is average. I do not regret this purchase, I recommend.

    Reacties (1)
    Toon origineel
  • 19/01/2016

    Not for space communications but if you live anywhere near the airport, it is an easy way to get the idea, whatś going on in the air above you. High quality pcb, all components includes, the board has even pre-soldered LC components for band-pass filter, so the hard work has been done for you.

    Reacties
    Toon origineel
Show:

    Totaal 0 Pagina's

    Ga naar pagina

    Wellicht ben je ook geïnteresseerd in

    recommendation for you
    • US$5.00
    • US$2.99
    • US$28.99
    • US$3.99
    • US$4.99
    • US$4.99
    • US$5.99
    • US$14.99
    • US$113.99
    • US$110.99
    • US$22.99
    • US$11.99
    • US$9.99
    • US$29.99
    • US$16.69
    • US$11.99
    • US$3.99
    • US$2.40