A very useful board to hold Arduino Nano and for providing wired access to Arduino pins. A LOT of careful soldering required. Recommend you place the 5 wire devices together BEFORE soldering to board. They have a sliding lock on each side, and they will not easily fit if you solder them in individually. Also, make sure the Nano sockets are at 90 degrees to the board, and spaced to holed an Arduino Nano. It is a good idea to use an assembled Arduino to make sure this is achieved - place sockets on the Nano and then place in board with Nano before soldering., and recommend you do this BEFORE attaching wired sockets.

A very useful board to hold Arduino Nano and for providing wired access to Arduino pins. A LOT of careful soldering required. Recommend you place the 5 wire devices together BEFORE soldering to board. They have a sliding lock on each side, and they will not easily fit if you solder them in individually. Also, make sure the Nano sockets are at 90 degrees to the board, and spaced to holed an Arduino Nano. It is a good idea to use an assembled Arduino to make sure this is achieved - place sockets on the Nano and then place in board with Nano before soldering., and recommend you do this BEFORE attaching wired sockets.

A very useful board to hold Arduino Nano and for providing wired access to Arduino pins. A LOT of careful soldering required. Recommend you place the 5 wire devices together BEFORE soldering to board. They have a sliding lock on each side, and they will not easily fit if you solder them in individually. Also, make sure the Nano sockets are at 90 degrees to the board, and spaced to holed an Arduino Nano. It is a good idea to use an assembled Arduino to make sure this is achieved - place sockets on the Nano and then place in board with Nano before soldering., and recommend you do this BEFORE attaching wired sockets.

muy buen acabado profecional

muy buen acabado profecional

muy buen acabado profecional

Quality board and components, very easy to solder due to the quality of the board.

Quality board and components, very easy to solder due to the quality of the board.

Quality board and components, very easy to solder due to the quality of the board.

Arduino Nano has just 4x 1,5mm holes for mounting but who has M1,5 screws?? :D :D :D :D This expansion board help that problem. Maximum 30 minutes soldering. Caution! The mother pins must be paralell for light connecting the Nano board!

Arduino Nano has just 4x 1,5mm holes for mounting but who has M1,5 screws?? :D :D :D :D This expansion board help that problem. Maximum 30 minutes soldering. Caution! The mother pins must be paralell for light connecting the Nano board!

Arduino Nano has just 4x 1,5mm holes for mounting but who has M1,5 screws?? :D :D :D :D This expansion board help that problem. Maximum 30 minutes soldering. Caution! The mother pins must be paralell for light connecting the Nano board!

Excellent with long terminal.

Excellent with long terminal.

Excellent with long terminal.

The letters and numbers on the board are printed as mirror low quality

The letters and numbers on the board are printed as mirror low quality

The letters and numbers on the board are printed as mirror low quality

Good items, very fast shipping

Good items, very fast shipping

Good items, very fast shipping

Assemblaggio facile e veloce se vi posso dare un consiglio saldate i strip con Arduino nano inserito

Assemblaggio facile e veloce se vi posso dare un consiglio saldate i strip con Arduino nano inserito

Assemblaggio facile e veloce se vi posso dare un consiglio saldate i strip con Arduino nano inserito

Ottimo prodotto, conforme alla descrizione

Ottimo prodotto, conforme alla descrizione

Ottimo prodotto, conforme alla descrizione

correct

correct

correct