Alle berichten

Q: If and when is this going to be available in EU warehouse?

gevraagd door cacomistle op 2021-06-06 03:26:28

diamondfish Aucune idée le mien est venu de Chine sans problème

2021-06-06 03:33:53 Nuttig (0)
Verzenden
antwoorden (1)

cacomistle Whatis the propeller spec? Thanks!

mutski 01/04/2021
The Razor is a great airframe and an excellent flier. It's a clever design, the parts are sturdy, assembly is easy, and the plane comes easily apart to fit in a compact box. It's a great plane for a backpack or to pack in a suitcase. BUT... The stock prop and spinner are trash; they are difficult to balance and introduce a lot of vibration. Toss them and buy a quality 40mm aluminum spinner and blades for 3.17mm motor shaft. This is a big plane for the recommended 2S 18650 lithium ion pack. Get high-drain lithium ion cells rated for at least 20 amps continuous. 10-amp cells can't keep up; the plane lacks power and flight times are short. If you want long flight times, consider building a 3S 18650 pack (two cells forward, one to the rear) or a 2S 21700 pack with Samsung 40T 4000mah cells end-to-end extending under the wing. With a 2S Samsung 40T pack, I get 30-40 minute flights. Too bad the battery compartment isn't big enough for a 2200 mah lipo, which is what this plane really needs. The FPV battery hatch cover accommodates a simple camera like the Runcam Racer3, but there isn't enough clearance between the hatch and the battery to easily fit a camera/DVR setup like the Runcam Split 3 Micro. I wound up building a camera pylon to mount the Split 3 Micro on the hatch over the flight controller, with the DVR board mounted on the bottom of the hatch cover. For short LOS flights, this plane is great right out of the box. With a few easy mods, it's a great plane for longer FPV flights. Either way, replace the stock prop. It's trash.
10
Reacties (2)

Kevlan You can find it on the ZOHD website, the VC400 is actually a ZOHD product Eachine have badged it.

2021-06-13 05:40:02 Nuttig (1)
Verzenden
antwoorden (1)

Q: When is PNP going to be restocked?

gevraagd door cacomistle op 2021-06-04 09:01:10

Kudos Hi,it is expected to restock in few weeks.

2021-06-06 10:34:19 Nuttig (0)
Verzenden
antwoorden (1)

Q: Is this going to be EU warehouse?

gevraagd door cacomistle op 2021-06-06 02:51:03

Pyrrhuline yes

2021-06-06 10:27:43 Nuttig (0)
Verzenden
antwoorden (1)

Q: What is the spinner diameter?

gevraagd door cacomistle op 2021-06-06 01:23:11

Erik_Janssen 40 mm

2021-06-06 01:26:58 Nuttig (2)
Verzenden
antwoorden (2)

Q: when I’ll the PNP version be available?

gevraagd door BG414854940 op 2020-12-25 10:39:10

cacomistle When is PNP going to be restocked?

2021-06-04 07:11:15 Nuttig (0)
Verzenden
antwoorden (2)