Alle berichten

Q: can I buy this is pcp kit thanks

gevraagd door BG835535151 op 2022-02-22 10:01:25

RudderOnlyRCGuy In the USA your choice is PNP or Kit only. Hope this helps.

2022-02-24 07:10:00 Nuttig (0)
Verzenden
antwoorden (2)

Q: Will the PNP version work with the Eachine TX16S radio transmitter?

gevraagd door Megatron op 2022-01-12 09:20:39

RudderOnlyRCGuy The PNP Echine F-16 is supplied with no receiver so any receiver that will work with the Echine TX16S transmitter should be able to be bound up and work in the jet. It should be a straight Transmitter compatibility issue. I hope this helps.

2022-01-13 02:21:24 Nuttig (1)
Verzenden
antwoorden (2)

Q: What batteries do I need for this?

gevraagd door BG457324317 op 2021-12-03 09:48:05

RudderOnlyRCGuy I use both 1300 and 1800 3S packs 30 C rating. The 1300 needs to go to the forward end of the battery area to set the CG properly. I get 3.5-4 minute flights mixed throttle flying.

2021-12-06 11:01:42 Nuttig (4)
Verzenden
antwoorden (4)

Q: Does the kit include the pushrods for the servos?

gevraagd door BG183254012 op 2021-11-20 12:04:54

RudderOnlyRCGuy Yes, the kit includes a pushrod and clevis set for the controls.

2021-11-20 06:25:26 Nuttig (1)
Verzenden
antwoorden (1)

Q: does KIT come with pushrods or anything of the nature?

gevraagd door Guitardino op 2021-07-27 08:46:07

RudderOnlyRCGuy Kit does come with pushrods and clevises. Kit has no electronics needs motor, fan, ESC and servos.

2021-09-28 06:11:21 Nuttig (0)
Verzenden
antwoorden (2)