Alle berichten

Q: is work 8n Malaysia?

gevraagd door alankuan172 op 2019-04-22 06:52:06

JohnnyG Sorry,no idea. I'm in Canada and it works here.

2020-12-18 05:54:37 Nuttig (0)
Verzenden
antwoorden (1)

JohnnyG 65Kpa= 9.4psi. This pressure switch is available in a number of pressure ranges. The lowest switches on at 70psi, and turns the pump off at 100 psi. Clearly the switch will not work on your low pressure pump.

2020-12-18 05:54:08 Nuttig (0)
Verzenden
antwoorden (1)

JohnnyG Noplugs or sockets are provided. You will have to solder the wires to the strip. Note also that a heat sink is needed as well.

2020-12-18 05:49:39 Nuttig (2)
Verzenden
antwoorden (1)

BG451651832 It is standard polarity (Pos-center; Neg-outer).

2020-12-17 06:26:49 Nuttig (1)
Verzenden
antwoorden (1)

georget Power Select 1 is the option to use if your power supply output is two wires. Power Select 2 is the option to use if your power supply has a plug or jack connected. Both options are connected in parallel on the circuit board. It is there for your convenience.

2020-11-04 09:55:44 Nuttig (0)
Verzenden
antwoorden (2)

ckitov I connected @12VDC and curren is 2.3A ... This is not 72W ... why you lie in the description

2020-01-26 03:53:47 Nuttig (1)
Verzenden
antwoorden (3)

Zoll verein the strip light has self-adhesive. if you use this item in a long time, the self-adhesive will lose stickiness.

2018-10-05 12:52:49 Nuttig (0)
Verzenden
antwoorden (1)