PNink
mijn inhoud
Alle berichten
Beoordelingen
Reacties
antwoorden
vragen

Alle berichten

PNink 16/11/2019
Bought this step drill mainly for the fact that it has 1mm steps - unlike most others that offer 2mm steps. The spiral flutes have one significant drawback: The tool grabs and pulls up the workpiece when breaking through from step to step, like a drill does. Something the straight fluted step drills avoid. Chip evacuation is not likely a problem for working on thin panels so I definitely recommend the straight flute step drills for better control. Other than that the tool is sharp and cuts well.
3-13mm/6-25mm/6-35mm M35 Cobalt Stap Drill Bit Double R 1/4 Inch Hexagon Shank Stap Drill
US$7.99 US$9.99
2
aanbevelingen
Reacties (0)
PNink 20/08/2020
This tap drill is a solid performer. I mainly use M3 and M4 with a power drill in mild steel and aluminium. Very good chip clearing and stays sharp for very long. Also haven't broken one of these yet - fingers crossed
Drillpro M3-M10 HSS Co M35 Machine Spiraal Fluiten Tikken metrisch Schroef Draadtap Rechtse Hand Draadtap Boor
US$8.99 US$10.99
0
aanbevelingen
Reacties (0)
PNink 15/07/2020
Decent quality but somwhat pricy - you pay for the convenience of a kit. Well packaged to avoid shipping damage
RIDEN® Digitale voeding behuizing S06A S400 voor RD6006 RD6006W Spanningsomvormer Metaalbehuizing Schaal Bevat geen voeding
US$45.99 US$83.99
0
aanbevelingen
Reacties (0)
PNink 15/07/2020
First impression was that someone must have deburred the face mill with a rock. surface finish was terrible. OK apperance is not everything for a tool. Mounting the inserts I reasised that one of the M4 threads was not well formed - reworked with a tap to make it fit. Final test was to sit the end-mill on a flat surface. It rocked - out by 0.2mm. Meaning the tips of the inserts are not on the same plane, will wear unevenly and leave excessive tool marks on the workpeace. Stopped checking there and contacted Bangood with my concerns. No apparent quality control.
400R-50-22 Face End Mill Met MT3-FMB22 Shank En 4pcs APMT1604 Inserts
US$45.99 US$55.99
0
aanbevelingen
Reacties (1)
PNink 15/07/2020
Ok for the price but by no means a precision instrument given the tolerances in the plastic parts, e.g. the scriber was not quite parallel to the base.
Digitale Hoogtemeter 150mm 6'' Schuifmaat Micrometer Elektronische Meting
US$35.99
0
aanbevelingen
Reacties (0)
PNink 16/11/2019
This carbide insert works well in non-ferrous material and soft steel. I chipped a few corners working in stainless steel, but still great value at that price.
Drillpro 10 stuks DCMT070204 YBC251 Carbide inzetstuk voor SDNCN1010H07/SDNCN1212H07 Draaigereedschap Houder
US$8.99 US$10.99
0
aanbevelingen
Reacties (0)
PNink 16/11/2019
This carbide insert works well in non-ferrous material and soft steel. I chipped a few corners working in stainless steel, but still great value at that price.
Machifit 10 stuks CCMT060204-HM YBC251 Carbide Insert Titanium Gecoate Carbide Cutter
US$6.59 US$12.99
0
aanbevelingen
Reacties (0)
PNink 16/11/2019
handy little set of prototyping PCBs - good quality and inexpensive
Geekcreit® 40 stuks FR-4 2.54mm Dubbelzijdig Prototyping PCB Gedrukte Schakeling
US$5.99 US$15.99
0
aanbevelingen
Reacties (0)
PNink 16/11/2019
very good machine tap for Aluminium - have not used it in steel as yet
Drillpro M3-M10 HSS Co M35 Machine Spiraal Fluiten Tikken metrisch Schroef Draadtap Rechtse Hand Draadtap Boor
US$8.99 US$10.99
0
aanbevelingen
Reacties (0)
PNink 16/11/2019
Have been using these 3 flute end mills with good success in my CNC router on aluminium. Great surface finish at surprising cutting speeds.
Drillpro 1-8 mm HRC58 3 groeven freesfrees Tungsten Carbide CNC freesgereedschap voor aluminium
US$5.66 US$6.99
0
aanbevelingen
Reacties (0)
PNink 16/11/2019
Ground rod was accurate within reason (0.01mm under as far as my micrometer measurements go).good surface finish with some slight marks, probably from transport. Deserves better packaging than only a plastic bag.
6/8/10/12mm Diameter Staaflengte 400mm Stalen cilinder Lineaire rail Lineaire as Optische as
US$11.99 US$14.99
0
aanbevelingen
Reacties (0)
PNink 16/11/2019
Nice sharp machine tap drill. Works as expected on softer materials like aluminium. Have not tried steel yet.
Drillpro M3-M10 HSS Co M35 Machine Spiraal Fluiten Tikken metrisch Schroef Draadtap Rechtse Hand Draadtap Boor
US$8.99 US$10.99
0
aanbevelingen
Reacties (0)
PNink 16/11/2019
Bought this 3 flute chamfering mill for spot-drilling and chamfering. Was expecting the spot drilling to be smoother than a 2 flute part but there was no significant difference as this tool also rattles a little. Maybe the flutes are not ground even enough? Overall a worthwhile part in the milling toolkit on my small CNC router.
3 Fluiten 60 Graden Afkantingsmolen AlTiN Gecoate HRC55 2/3/4/5/6/7/8mm Tungsten Staal Frees
US$12.99 US$19.99
0
aanbevelingen
Reacties (0)
PNink 11/11/2018
I bought the N58 ECG watch to replace a sports watch with the added benefit of keeping it on my wrist for the rest of the day. Let's see if this product lives up to the expectations. The good points: Out of the box this watch measures heart rate and even blood pressure with surprising accuracy. Watch bands are quickly exchanged between sport and normal use. Look and feel is pretty good The 'analogue' watch dial is appealing and the wakeup on wrist rotation works well. Here are the things that were letting it down: On closer look the plastic watch case looks cheap. In sports mode (walking) the heart rate was only measured every hour - that is useless but I could not find a way to change it Most screens are taken up by large pictograms instead of making the important parameters bigger and easier to read But here is the show-stopper: This watch needs the WearHeart App on the phone to function. This app is poorly written and conceived. Amongst other annoyances it occupied the BT interface so intensively when the watch was out of range that the in-car hands-free and BT streaming from my phone stopped working! Also the battery consumption from the BT interface was enormous! I had to uninstall this App to get my phone back to normal So overall: Great Hardware let down by a lousy App. The N58 ECG did not live up to my expectations and I feel I wasted my money.
Bakeey N58 ECG EKG Display HR Slaapmonitor 3D UI Multi-sport Fitness Tracker Leren band Smart Watch
US$66.24 US$79.99
6
aanbevelingen
Reacties (1)
PNink 18/03/2019
Very useful and versatile little relay board - as long as you don't use it to switch 240V mains. The clearances for that are not sufficient, especially between neighbouring relays. Stay safe and use it for voltages below 48V only.
Geekcreit® 5V 4 Kanaals Relais Module voor PIC ARM DSP AVR MSP430 Geekcreit voor Arduino - producten die werken met officiële Arduino-boards
US$1.99 US$9.99
0
aanbevelingen
Reacties (0)
PNink 21/07/2019
One of my favourite end mills for machining aluminium with the CNC router. Good finish and performance for a inexpensive cutter.
Drillpro 1-8 mm 2-fluiten hardmetalen freesfrees HRC55 AlTiN-coating CNC-freesgereedschap
US$7.99 US$9.99
0
aanbevelingen
Reacties (0)
PNink 18/03/2019
Great alarm clock - love the projection feature and the fact that the display can be dimmed down to no backlight. The USB charger is very useful too. Only room for improvement is that the clock tends to slide around easily especially when the USB cable is used. A rubber foot would be a good addition.
Digoo DG-C10 LCD Draadloze USB-oplaadbare achtergrondverlichting Projectieklok Temperatuur-vochtigheidskwaliteit Bureauklok voof telefoon Pad-luidspreker
US$18.52 US$25.73
0
aanbevelingen
Reacties (0)

Jij bent de expert, kan je helpen?

We nodigen je van harte uit om je te abonneren op de Invite Answer-e-mail!

Als u zich abonneert, nodigen we u uit via e-mail om vragen te beantwoorden die mensen hebben over producten. Door je te abonneren, verdien je ook de "Behulpzame Badge "! U kunt zich op elk moment uitschrijven op de pagina met privacyinstellingen.

Help anderen en wees gelukkiger!

  • Abonneren

Over badges

Badges zijn gerelateerd aan de community en gebruikers verdienen badges door kwaliteitsinhoud te creëren, missies te voltooien of door deel te nemen aan speciale activiteiten. Specifieke mensen hebben ook hun eigen exclusieve badge.
CEO badge

de ceo-badge is alleen in handen van de baas van Banggood.

Badges die je kunt verdienen, komen binnenkort
  • Oké

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • Oké

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe