Alle berichten

Wh0da it's a standard 12v plug, I'm sure the 5v you refer to is smaller. You could change the plug or find an adapter, but unlikely it would work out of the box. The voltage is variable too without a readout, so any movement of the rotary adjuster will change the output voltage and could cause damage to your unit. I would advise a fixed output adapter with a 5v plug to be the better solution.

2022-02-05 08:23:24 Nuttig (0)
Verzenden
antwoorden (1)

Q: Can i use it for vacuum system?

gevraagd door Adi Moh Zaelani op 2022-01-19 08:51:21

Wh0da it's is designed to prevent pressure pushing out of the valve until needed. You want to create a negative pressure behind the valve which is the opposite of the design. It is possible it may work, but you should look for a suitable solution made for your requirement.

2022-02-05 08:16:23 Nuttig (0)
Verzenden
antwoorden (1)

General A piece of wire 560 mm long will suffice to start with.

2020-12-15 12:58:35 Nuttig (1)
Verzenden
antwoorden (2)