KevvvLar
Q: does this remote work on any drone?
gevraagd door thomasverkerk op 2020-12-21 12:08:37
Q: Is it ok for the Racerstar BR1811-2000KV engine ??
gevraagd door ConteVlad op 2019-09-02 03:52:51
KevvvLar Thatall depends on what you're flying. From personal experience I wouldn't use a folding propellor on anything other than a motor glider. Looking at the stats for the motor it produces 150g of pull on a 6x3 prop. Your model would have to weigh between 215g - 250g to give a thrust ratio of 60-70% of the AUW (all up weight) - that is if you're sticking the prop on a motor glider. If it's anything other than a glider I wouldn't bother with a folding prop because the model moves too fast and the blades fold back too easily leaving you no power to pull the aircraft through the air.
2020-12-09 04:16:40 Nuttig (0)Q: Can use 30A esc with this motor?
gevraagd door weeliam_wong op 2019-09-16 09:56:05
KevvvLar If you look at the test data for different propellers the required ESC would vary between 20 to 40 amps. Smaller props with less voltage would require less amps.
2020-07-01 03:07:09 Nuttig (0)Q: what diameter is the prop shaft?
gevraagd door KevvvLar op 2020-05-08 03:09:44
Felicity not sure
2020-06-07 09:04:11 Nuttig (0)Q: Does this sound system contains the engine sound of helicopter ?
gevraagd door david op 2019-08-02 12:47:58
KevvvLar Not as standard but if you plug it into your computer you can download different sound files. I think on the one I ordered it had sound files for a radial engine and I downloaded the sound files for a Merlin engine found in a Spitfire. Sounds great.
2020-05-31 03:10:35 Nuttig (1)Q: Already asked by another: Can the wheel be turned 90° to be able to fold flat into the wing?
gevraagd door BG413254020 op 2020-05-10 06:04:21
KevvvLar Yes. Loosen the grub screw and take out the wire leg. Be sure to file or grind a flat onto the side of the leg in contact with the grub screw otherwise the leg could twist on contact with the ground. You’ll notice a flat on it already, just do the same 90 degrees to that.
2020-05-17 01:26:59 Nuttig (1)
Q: what size propeller does it require?
gevraagd door JoseB op 2019-08-19 10:44:37
KevvvLar A 5x3 prop would do just fine
2020-03-23 06:41:53 Nuttig (1)Q: are the header pins for the servos already soldered on?
gevraagd door KevvvLar op 2019-09-11 12:13:48
srang Yes,on the FrSky RX6R receiver the header pins are already soldered.
2020-03-19 12:18:43 Nuttig (1)
PaoloMascagni ladifferenza sta nella possibilita di trasmettere in modo b16 per il modello internazionale. il canale b16 in gran parte di europa " inlegale"
2019-10-23 11:27:25 Nuttig (0)
GroundControlRC The Wing / Aileron Servo goes into the center of the fuselage and upside down so the servo arm is under the wing. I posted a Tutorial Series on building this Plane Step-by-Step and performed the Maiden Flight. I would provide a link to the Playlist but it 's not allowed from this post. If you go to our Youtube Channel (Search for Ground Control RC) and select the Playlist Tab you will find the Playlist for the Build Tutorial and Maiden Flight of this Plane. See you in the Air! Ground Control RC
2019-09-11 05:03:32 Nuttig (0)
We nodigen je van harte uit om je te abonneren op de Invite Answer-e-mail!
Als u zich abonneert, nodigen we u uit via e-mail om vragen te beantwoorden die mensen hebben over producten. Door je te abonneren, verdien je ook de "Behulpzame Badge "! U kunt zich op elk moment uitschrijven op de pagina met privacyinstellingen.
Help anderen en wees gelukkiger!
Thank you for subscribing! You have also earned a badge!
Thank you! Your answer will help ###name### and ###num### other people!
Check awaiting answers to see more people who need help.
Thank you! Your answer will help ###name### and ###num### other people!
Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!
We invite you to subscribe to our Invite Answer email!
Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.
KevvvLar FHSS is a Futaba radio protocol. So long as your receiver is using the FHSS then you’re fine.
2021-01-09 07:17:41 Nuttig (0)