Alle berichten

Q: My switch randomly turns on and off. Is there a way to stop this?

gevraagd door BG155642218 op 2020-08-16 12:08:52

GRC71 Theremay be some interferences (including magnetic fields), or bad connectors. How do you power it? Using the power supply, or batteries. If you are using the second option, be sure the batteries are fully charged otherwise the relay lock itself, once the voltage it's too low.

2020-10-08 11:41:23 Nuttig (0)
Verzenden
antwoorden (1)

Q: cuál es la diferencia de 1,2 o 3 baterías?

gevraagd door BG161644419 op 2020-07-11 12:59:26

GRC71 You can fly the quadcopter for longer, changing the battery as soon as it runs out.

2020-07-12 03:43:55 Nuttig (0)
Verzenden
antwoorden (6)

Q: Can the double version work with 5V at 400mA? Not experienced with 2-6s meaning

gevraagd door juliangliniecki op 2020-04-08 04:19:29

GRC71 According to the specs, it won't work with 5V, as the minimum voltage you have to provide for the double strobes version, it's 7.4V (2S). 3S 11.1V 4S 14.8V 5S 18.5V 6S 22.2V

2020-04-20 08:48:52 Nuttig (0)
Verzenden
antwoorden (2)

Q: It is works in my car with 12 v battery?

gevraagd door stamatis op 2017-12-15 03:16:59

GRC71 You can use 12V ONLY with the version that uses 2 strobe lights.

2020-04-20 06:09:17 Nuttig (0)
Verzenden
antwoorden (4)

Q: How much volt is this?? 5v or 3.3v

gevraagd door BG443717559 op 2020-04-17 08:37:28

GRC71 To power the Arduino Nano you can to plug it to the USB of your PC-Laptop (5V) using the serial cable. You still have though, the option of powering it using the 5V pin, using a voltage regulator (voltage has to be accurate). If you use the Vin port, you can use up to 12V to power it, but this is the last efficient way, as you dissipate through heat the excess of voltage. Regarding the output you have also the 3.3V pin. I hope it's helpful.

2020-04-20 06:05:01 Nuttig (0)
Verzenden
antwoorden (5)