Johnnie_M
mijn inhoud
Alle berichten
Beoordelingen
Reacties
antwoorden
vragen

Alle berichten

Johnnie_M 26/03/2020
The bumper looks very nice on the car and I believe it can also help for the front crashes. The only problem is that they do not include the four M3x16 screws to mount it properly. You can see in the last photo that I have used four silver screws that I bought from my local hardware store.
4PCS ZD Racing 8481 Voorbumper Set voor 9116 08427 9021 V3 1/8 RC Auto Onderdelen
US$6.00 US$10.99
1
aanbevelingen
Reacties (0)

Johnnie_M@BG201078463 I had a pair of crimper for many different numbers but because I couldn't do it good enough I used a pair of flush cutters and did it very slowly so I only bend the small jst connectors on the wire.

Johnnie_M 26/03/2020
This is a very nice product in general. But I wanted to have more control on the discharging volts or have something like a refresh discharge which will be changing-discharging the battery 3 times... When the fan kicks in it sounds like a mini jet engine. This is happening when you discharge the battery mostly because it needs to cool down the resistors. If they had done what the ToolkitRC M8 does it would discharge the battery way faster (the discharging current goes back to the input battery if there is a battery of course). The ToolkitRC also gives the option to check the balance of the battery without putting power on the input, this would be a good idea if it can be done with a firmware update. You "can" check the balance of a battery on the field by connecting the balance wires normally and the main leads of the battery to the input of the battery like in the second photo (if the wires are long enough) or connect a usb powerbank to usb port, you cannot do anything except monitor the balance but you can do it.
ISDT Q8 BattGo 500W 20A High Power Battery Balance Charger Ontlader voor 1-8S Lipo-batterij
US$65.99 US$85.99
0
Reacties (2)
Johnnie_M 26/03/2020
This is a very nice product in general. But I wanted to have more control on the discharging volts or have something like a refresh discharge which will be changing-discharging the battery 3 times... When the fan kicks in it sounds like a mini jet engine. This is happening when you discharge the battery mostly because it needs to cool down the resistors. If they had done what the ToolkitRC M8 does it would discharge the battery way faster (the discharging current goes back to the input battery if there is a battery of course). The ToolkitRC also gives the option to check the balance of the battery without putting power on the input, this would be a good idea if it can be done with a firmware update. You "can" check the balance of a battery on the field by connecting the balance wires normally and the main leads of the battery to the input of the battery like in the second photo (if the wires are long enough) or connect a usb powerbank to usb port, you cannot do anything except monitor the balance but you can do it.
ISDT Q8 BattGo 500W 20A High Power Battery Balance Charger Ontlader voor 1-8S Lipo-batterij
US$65.99 US$85.99
0
aanbevelingen
Reacties (2)
【upgrade】iMars 7 Inch 2+32G Android 10.0 Autostereo Radio MP5-speler 2 Din 2.5D Scherm GPS WIFI bluetooth FM met achteruitrijcamera
US$63.99 US$165.99

Q: does it comes with 3GB RAM and 64GB ROM

gevraagd door akamali59 op 2020-11-10 04:08:27

Johnnie_M No it doesn't, not this particular model.

2020-12-20 04:32:21 Nuttig (0)
Verzenden
antwoorden (3)
【upgrade】iMars 7 Inch 2+32G Android 10.0 Autostereo Radio MP5-speler 2 Din 2.5D Scherm GPS WIFI bluetooth FM met achteruitrijcamera
US$63.99 US$165.99

Q: is this item fit for my toyota hilux 3.0 d4d 2009 model?

gevraagd door BG113515173 op 2020-12-11 08:40:44

Johnnie_M It can fit, but you need a plastic trim adapter which you have to buy separately.

2020-12-20 04:30:57 Nuttig (0)
Verzenden
antwoorden (1)
Johnnie_M 14/05/2020
Looks good. Someone asked for the exact dimensions...
DANIU Elektrische Knip Tang Draad Kabel Snijder Zijkniptang Flush Pliers Gereedschap
US$9.99 US$12.99
2
aanbevelingen
Reacties (0)
Johnnie_M 26/03/2020
To be fair, I got the car but I haven't got to use it outside yet (fuck you coronavirus). I tried to use it on my veranda but, hell, it is too fast to test anything. I changed the connector of the battery from T-plug to xt60 so I can use my own charger. With the T-plug I desoldered from the battery I made an xt60 adapter. Because I wanted to use my own charger I had to "merge" the two 2s batteries balancing wires. You have to use a 5 wire jst connector and put the cables like the 6th photo (you don't use the one wire from the series connector). Remember to tighten ALL the screws and use Threadlocker. One of the screws that I checked was one that locks a metal bar in the front suspension (last two photos), I tried to tighten it down but it was stuck and now I cannot tight or untight it because it is destroyed... I don't know if it is going to be a problem when I make jumps, I will try to find a spare part.
ZD Racing Twee Battery 08427 1/8 120A 4WD Brushless RC Auto Off-Road Truck RTR Model
US$378.99 US$470.99
1
aanbevelingen
Reacties (0)
Johnnie_M 26/03/2020
It is a very nice addon because it tumbles easily from the too much torque (4s battery). By the way it also looks very good! The wheels have ball bearings.
ZD Racing 8482 Wheelie Bar met Schroeven voor 08427 9116 1/8 RC Voertuigen Auto Model Reserveonderdelen
US$7.49 US$15.99
1
aanbevelingen
Reacties (0)
Digitale OLED programmeerbare interface DC5525 Soldeerbout Soldeerstation Sapphire-versie:
US$56.19 US$74.43

Q: Can I use my laptop power supply? It is 19V, 4,75A

gevraagd door Marcoop op 2020-02-18 04:41:47

Johnnie_M Yes I use a 19v laptop power brick and it goes from 30°c to 450°c in 14 seconds!!!

2020-06-25 09:09:55 Nuttig (0)
Verzenden
antwoorden (4)
ToolkitRC M6D 500W 15A Hoogvermogen DC Dual Smart Lader Ontlader voor 1-6S Lipo LiHV Lion NiMh Pb Batterij
US$69.99 US$88.99

Q: what is the recommended PSU?

gevraagd door Joel Yek op 2020-05-13 09:57:19

Johnnie_M If you want full 500 watts output you need a PSU (power supply unit) that is 20% more from what you need, so something around 600 watts at 24 volts.

2020-06-09 02:33:58 Nuttig (0)
Verzenden
antwoorden (4)
Digitale OLED programmeerbare interface DC5525 Soldeerbout Soldeerstation Sapphire-versie:
US$56.19 US$74.43

Q: what is a sapphire version, how is it different from normal ts100

gevraagd door sarun_s_m op 2017-12-31 12:12:17

Johnnie_M It is the same thing with only difference the tip, this one has the TS-I Solder Tip which is more pointy than the TS-B2

2020-05-25 05:33:07 Nuttig (0)
Verzenden
antwoorden (3)
Digitale OLED programmeerbare interface DC5525 Soldeerbout Soldeerstation Sapphire-versie:
US$56.19 US$74.43

Q: what is the difference between this and [*****,479.*****% OFF]MINI TS100 Digital OLED Programmable Interface DC5525 Soldering Iron Station Built-in STM32 Chip Professional Tools from Tools, Industrial & Scientific on banggood.com https://banggood.app.link/YXBsII3mM6

gevraagd door Saad1122 op 2020-05-25 10:50:20

Johnnie_M It is the same thing with only difference the tip, this one has the TS-I Solder Tip which is more pointy than the TS-B2

2020-05-25 05:31:38 Nuttig (0)
Verzenden
antwoorden (1)
Johnnie_M 14/05/2020
It is silicone, it doesn't get burned with soldering iron Nice dimensions, not too big, not too small.
DANIU 34x23cm Hittebestendige Siliconen Mat Onderlegger voor Onderhoudswerkzaamheden Platform BGA Soldeerstation Reparatie
US$17.99 US$24.99
0
aanbevelingen
Reacties (0)
Johnnie_M 14/05/2020
They look nice and useful but I haven't tried them yet.
5 stuks goede wick BGA desoldering draad CP-1515 CP-2015 CP-2515 CP-3015 CP-3515
US$11.99 US$14.99
0
aanbevelingen
Reacties (0)
DANIU Elektrische Knip Tang Draad Kabel Snijder Zijkniptang Flush Pliers Gereedschap
US$9.99 US$12.99

Q: All the All 11 (mostly unnecesary) pictures show the same side of the cutter. I want to see a close up of the otherside of the cutting edges to see if it's beveled or flat.

gevraagd door presch op 2018-05-21 02:04:45

Johnnie_M I will put photos from all sides on my review tomorrow

2020-05-13 07:34:11 Nuttig (0)
Verzenden
antwoorden (9)

Jij bent de expert, kan je helpen?

We nodigen je van harte uit om je te abonneren op de Invite Answer-e-mail!

Als u zich abonneert, nodigen we u uit via e-mail om vragen te beantwoorden die mensen hebben over producten. Door je te abonneren, verdien je ook de "Behulpzame Badge "! U kunt zich op elk moment uitschrijven op de pagina met privacyinstellingen.

Help anderen en wees gelukkiger!

  • Abonneren

Over badges

Badges zijn gerelateerd aan de community en gebruikers verdienen badges door kwaliteitsinhoud te creëren, missies te voltooien of door deel te nemen aan speciale activiteiten. Specifieke mensen hebben ook hun eigen exclusieve badge.
CEO badge

de ceo-badge is alleen in handen van de baas van Banggood.

Badges die je kunt verdienen, komen binnenkort
  • Oké

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • Oké

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe