Klantbeoordelingen

Schrijf een beoordeling
  • Alle beoordelingen(57)
  • Afbeeldingen
  • Videos
  • Ster
    • Ster(57)
    • 5 Star(51)
    • 4 Star(2)
    • 3 Star(3)
    • 2 Star(0)
    • 1 Star(1)
Sorteren op:
Top recensie
  • Top recensie
  • Meest nuttig
  • meest recent
Recensies alleen uit uw land (United States)
|
Toon origineel

Een deel van de recensie is automatisch vertaald.

  • 09/05/2021

    Product arrived as described. Packaged very well. No damage to product. I purchased this item specifically to convert 1 side of my Mankati 3D printer to print with 1.75mm flex filament. Now I can print with 3mm and 1.75mm filament. The extruder mounts perfectly to a nema 17 stepper motor. This extruder can work with flexible filament. When I first used it I had to change the e-steps value. Because this item is transparent it helps to see any problems. When I tried my first print the flexible filament was escaping between the rollers. After some trial and error I found that the original spring is too strong/stiff. NOTE: IF YOU WANT TO PRINT WITH FLEX FILAMENT YOU WILL NEED TO CHANGE THE SPRING. I used 2 springs from a bicycle quick-release skewer. These springs have much less strength than original spring. See photos. These worked perfectly. After some tuning of print speed and flow the print quality is excellent. Using the existing spring I expect that this extruder will work very well. I will continue to use the extruder with the new springs. Banggood, I would recommend you supply a weaker spring; maybe half the strength would be ok.

    Reacties
    Toon origineel
  • 06/06/2021

    the extruder is good but i had problems with mounting it to ender 3 pro. the one side was in the contact with threaded rod and was jamming it so i had to trim one side as shown in the picture.

    Reacties
    Toon origineel
  • 30/06/2021

    excelente servicio

    Reacties
    Toon origineel
  • DomVIP3
    ZA
    20/04/2021

    Received in good order have yet to test.

    Reacties
    Toon origineel
  • 25/10/2021

    Přišlo včas a v pořádku.

    Reacties
    Toon origineel
  • 27/02/2021

    Working perfectly.

    Reacties
    Toon origineel
  • 27/11/2020

    super en remplacement sur ma tevo tarantula pro

    Reacties
    Toon origineel
  • 11/01/2022

    works well, but be warned if you want to install on an Ender 3. It doesn't fit the Ender because the lead screw gets in the way. You can use a file or grinder to file out a piece of the extruder's case so it fits, but it's quite some work. In the end it's worth the effort, it will help you achieve faster printing speeds with no underextrusion due to the printer skipping steps. It was a bit noisier than the stock extruder when using linear advance and fast printing speeds, but this can be sorted out by adjusting the "screw" that tensions the extruder gears

    Reacties
    Toon origineel
  • 08/05/2021

    Works well and east to install. had to grind down the housing slightly to fit Ender 3 Pro. Comes in nice package and includes tools

    Reacties
    Toon origineel
  • 05/12/2021

    worth the money and its see through which is interesting, also lightweight and can be used for direct drive

    Reacties
    Toon origineel
Show:

    Totaal 0 Pagina's

    Ga naar pagina

    Wellicht ben je ook geïnteresseerd in

    recommendation for you
    • US$5.99
    • US$11.99
    • US$31.99
    • US$12.99
    • US$5.99
    • US$53.99
    • US$11.99
    • US$84.99
    • US$10.55
    • US$61.99
    • US$29.99
    • US$4.19
    • US$5.99
    • US$18.99
    • US$8.96
    • US$15.99
    • US$42.99
    • US$20.99