Schrijf een beoordeling
  • Alle beoordelingen(39)
  • Afbeeldingen
  • Videos
  • Ster
    • Ster(39)
    • 5 Star(36)
    • 4 Star(2)
    • 3 Star(1)
    • 2 Star(0)
    • 1 Star(0)
Sorteren op:
Top recensie
  • Top recensie
  • Meest nuttig
  • meest recent
Recensies alleen uit uw land (United States)
Toon origineel

Een deel van de recensie is automatisch vertaald.

  • 09/05/2021

    Product arrived as described. Packaged very well. No damage to product. I purchased this item specifically to convert 1 side of my Mankati 3D printer to print with 1.75mm flex filament. Now I can print with 3mm and 1.75mm filament. The extruder mounts perfectly to a nema 17 stepper motor. This extruder can work with flexible filament. When I first used it I had to change the e-steps value. Because this item is transparent it helps to see any problems. When I tried my first print the flexible filament was escaping between the rollers. After some trial and error I found that the original spring is too strong/stiff. NOTE: IF YOU WANT TO PRINT WITH FLEX FILAMENT YOU WILL NEED TO CHANGE THE SPRING. I used 2 springs from a bicycle quick-release skewer. These springs have much less strength than original spring. See photos. These worked perfectly. After some tuning of print speed and flow the print quality is excellent. Using the existing spring I expect that this extruder will work very well. I will continue to use the extruder with the new springs. Banggood, I would recommend you supply a weaker spring; maybe half the strength would be ok.

    Toon origineel
  • 06/06/2021

    the extruder is good but i had problems with mounting it to ender 3 pro. the one side was in the contact with threaded rod and was jamming it so i had to trim one side as shown in the picture.

    Toon origineel
  • 27/11/2020

    super en remplacement sur ma tevo tarantula pro

    Toon origineel
  • 30/06/2021

    excelente servicio

    Toon origineel
  • DomVIP3

    Received in good order have yet to test.

    Toon origineel
  • 27/02/2021

    Working perfectly.

    Toon origineel
  • 08/05/2021

    Works well and east to install. had to grind down the housing slightly to fit Ender 3 Pro. Comes in nice package and includes tools

    Toon origineel
  • 19/03/2021

    arrived in amazing conditions will instal later

    Reacties (1)
    Toon origineel
  • 12/03/2021

    Arrived in a nice box with instructions, mounting screws motor mount and two Alan keys and ptfe tube well worth the money.

    Toon origineel
  • 12/02/2021

    Ottimi ben fatti e sembrano robusti, bello il trasparente. Purtroppo tempi lunghi più del preventivato.

    Toon origineel

    Totaal 0 Pagina's

    Ga naar pagina

    Wellicht ben je ook geïnteresseerd in

    recommendation for you
    • US$12.99
    • US$13.99
    • US$11.99
    • US$24.99
    • US$6.99
    • US$10.99
    • US$21.99
    • US$3.17
    • US$38.99
    • US$37.99
    • US$9.99
    • US$7.99
    • US$23.99
    • US$18.99
    • US$5.99
    • US$11.99
    • US$42.99
    • US$11.99