Een deel van de recensie is automatisch vertaald.
Using the XY-SK35 as replacement for wall-warts for single board computers in combination with old laptop adapters. Made a console-enclosure with a 3D-printer to make it more accessible and user-friendly.
Just received the SK35. I have not had much time on it but it seems to work well. I used it as a battery eliminator for a single cell LiPo powered mini PC(Gole1). The Gole1 current draw was typically well under 1.6 amps(~.56A@idle). I connected the SK35 output to the Gole1's battery input connector. The SK35 ran fairly cool under that load. Supplied the SK35 with a 19.5V laptop power supply, set volts out to 4.7, set outgoing current limit to 3 amps. Ran it in CV for this application. The SK35 retains the setting, even when the laptop power supply is removed. Overall pretty nice gadget. Ultimately, I will place the SK35 in to an enclosure with banana plugs, should be a pretty nice little bench supply. Delivery was a little long(90 days) due to the Covid factor. If you want it faster , you may want to choose a faster shipping option. Thanks Banggood.
非常に良いです
最高です!
working well
received in good condition. not tested
All good
top
Muito bom e o acabamento é ótimo.
Nice universal charging module. With higher currents it may get pretty hot. I was curious what is under heat sink and found out there is no thermal paste so I applied some. It doesn't lower the temperatures significantly but it will improve thermal dissipation from semiconductors to heat sink.