4.94 van5
Schrijf een beoordeling
  • Alle beoordelingen(197)
  • Afbeeldingen
  • Videos
  • Ster
    • Ster(197)
    • 5 Star(187)
    • 4 Star(9)
    • 3 Star(1)
    • 2 Star(0)
    • 1 Star(0)
Sorteren op:
Top recensie
  • Top recensie
  • Meest nuttig
  • meest recent
  • tecno
    2017-11-24 10:53:17

    Very interesting frame, very good barycentre you can get great flights if your building is well cared for. The correct position of the arms is that in the photo, my advice is to not mount the drone arms under the cabin. For a perfect result, I suggest you slightly slicing the top plate at the points shown in the photo, this will allow you to 100% prevent your 5" props from touching the frame when benting. Great frame for freestyle!!!

  • 2018-03-29 04:35:40

    Лучи очень жесткие, согнуть невозможно. Собранная рама в центре немного играет. Чтобы решить проблему склеил все лучи в центре суперклеем, стала совсем монолитной. Можно просверлить отверстие по центру и скрепить лучи винтом с шайбой. Лучи шириной 9мм, со скрипом влезли регуляторы

  • 2017-12-10 19:38:52

    Havent built the quad yet, but this frame looks amazing. One thing i'm not sure about is the inner screws looked in place by a plastic hubs... it seams a bit fragile to hold a arm that way... the outer screw and hub are metal and in the end the arm is very secure... but only time will tell if that inner plastic hub is gonna hold on crashes.

    Reacties (3)
  • Mirekk
    2018-11-04 06:47:49

    I love this frame, especially the fact it's got 6mm arms. the arms should be mounted ON TOP of the bottom plate for a better balance. problem is it leaves room for a 2-boards stack only. I have esc-fc-vtx and I couldn't fit it, I had to mount the arms below the bottom plate. I mean, it works well anyway, it just throws the balance off a tiny bit. still, great frame. ah, also, they don't have spare parts

  • 2018-04-30 02:59:06

    This is a great frame. So beautiful and well built. I have had a lot of crashes and the frame has held up without a scratch in every single one. It is quite tight inside. I managed to fit just about a AIO FC, the board to the RunCam Split 2, and a Eachine VTX03 with a millimeter to spare on the top plate.

  • 2018-01-27 09:44:34

    Ich war sehr erstaunt dass da auch noch ein leistungsfähiges PDB dabei war. Die Verarbeitungsqualität der frameteile ist sehr gut. Ein toller X-frame der einem ausreichend Platz für die Technik bietet. Die LIPO-Halterung (für unten) ist auch dabei.

  • 2017-11-28 08:40:31

    good frame.. good parts as always. Upgrade parts available from Fatalg.com.. LOL..Turning this into an Urban tank will be a lot of fun. See it transformed into a beast.

  • Redd
    2018-05-31 15:30:54

    Plenty of space to set up yor built. Package contains PDB board. Arms are 6mm thick so better get min 8mm screws to place your motors. Only diss is for improve the camera cover. Nov is to much exposed to front hits.

  • Pafff
    2018-05-27 03:45:09

    Понравилась эта рама. Лёгкая жесткая не дорогая. Много места для оборудования. В качестве курсовой камеры можно установить классическую HS1177.

  • US
    2018-10-20 11:23:06

    I got this for my first quad..... so if you know how that goes you crash a lot. still haven't broken any thing yet (even after hitting a tree top doing probably +80 and then falling to the ground +60 feet) I still cant believe nothing broke. so if you want something sturdy this is definitely a good one..


    Go to page


    Wellicht ben je ook geïnteresseerd in

    recommendation for you
    • US$70.88
    • US$15.90
    • US$1.53
    • US$12.37
    • US$1.78
    • US$29.99
    • US$2.99
    • US$4.99
    • US$1.17
    • US$1.53
    • US$43.99
    • US$13.99
    • US$2.74
    • US$2.49
    • US$11.99
    • US$3.25
    • US$3.99
    • US$37.55