Klantbeoordelingen

Schrijf een beoordeling
  • Alle beoordelingen(2011)
  • Afbeeldingen
  • Videos
  • Ster
    • Ster(2011)
    • 5 Ster(1918)
    • 4 Ster(73)
    • 3 Ster(15)
    • 2 Ster(3)
    • 1 Ster(2)
Sorteren op:
Top recensie
  • Top recensie
  • Meest nuttig
  • meest recent
Recensies alleen uit uw land (United States)
|
Toon origineel

Een deel van de recensie is automatisch vertaald.

  • 03/08/2020

    Received as described. Tested, and it's working. Not assembled yet. I made a model of the bracket with measurements as precise as I could. Screws are M6. https://www.thingiverse.com/thing:4560615

    Reacties
    Toon origineel
  • 26/12/2020

    Bought this to cut aluminium on my 3018 pro. I have a couple of issues to start with: the motor wires need to be lengthened for this to adequately move on the machine. simple enough to do with a couple of barrel connectors, but just be aware. The second is the fan on the top of the motor. its verticle fins only really disrupt the air and do not keep the motor cool enough. i have designed and printed a propper cooling fan which keeps the motor temp down, as it can get quite hot. the final thing to moan about is the power box. there is no safety switch, once plugged in the system is live so make sure the speed control is at zero or the motor is no where near anything. its easy enough to add one, and you can even use a relay to switch it on and off from the original board. so onto the good bits. the motor is easy enough to setup, the aluminium block i recommend you use, as it acts as a heat sink for the motor. you will have to print a new carriage for it though. for the 3018 pro machine, the motor doesnt put too much strain on the x axis, but for greater depths and speed, i recommend adding an additional rail to reduce flex. the motor is actually quieter than the original motor, and will allow you to mill aluminium, and it may do steel at a really low feedrate. i am still experimenting with speeds and feeds, but all in all a really good kit to upgrade the basic 3018 bench mills!

    Reacties (7)
    Toon origineel
  • 30/08/2019

    item as described

    Reacties (2)
    Toon origineel
  • 01/08/2017

    Excellent product with great price. Shipping was fast & received within 10 days. Packaging was not so good, bu the product is as described. In fact, the motor performance is very good. No noise. No vibration.

    Reacties
    Toon origineel
  • 07/09/2020

    embalagem recebida em muito pouco tempo aqui no brasil, muito bem embalada e protegida, encomenda bem rastreada por banggood e pelo correio. funciona muito bem, eu recomendaria este produto, base sólida ideal para uso em máquinas cnc e com medidas para montar até um perfil de alumínio 20x80. qualquer dúvida pode perguntar, em português, inglês ou espanhol. package received in a very short time here in brazil, very well packed and protected, order well tracked by banggood and by the post. it works very well, i would recommend this product, solid base ideal for use in cnc machines and with measures to mount up to an aluminum profile 20x80. any doubt can ask, in portuguese, english or spanish. paquete recibido en muy corto tiempo aca en brasil, muy bien embalado y protegido, encomienda bien rastreada por banggood y por los correos. funciona muy bien, recomendaria este producto, base solida ideal para usar en maquinas cnc y con medidas para montarse hasta en un perfil de aluminio 20x80. cualquier duda pueden preguntar, en portugues, ingles o español.

    Reacties (3)
    Toon origineel
  • 10/12/2016

    Ek gebruik die "Spindle" nou al vir n geruime tyd en het geen probleme sover nie...hy loop baie sag en het baie krag selfs op lae revolusies...ek kan nou in verskillende plastiek sny sonder dat dit smelt..het met hom ook aluminium gesny...werk goed

    Reacties (2)
    Toon origineel
  • 14/07/2020

    Absolutely love this! I made a video where I use one to turn a 3D printer into a CNC and it kinda works well! I've cut wood, plastic, aluminium, linoeum so far. https://youtu.be/52GsS5nopCY The only fault I would say is the Chinese writing on the PSU so you need to take care when wiring it up.

    Reacties (1)
    Toon origineel
  • 20/03/2021

    its very strong and powerfull motor.if you want to cut something fast you should buy it. 1 haftada geldi tavsiye ederim.gümrük falan ödemedim.direct mail ile.

    Reacties (1)
    Toon origineel
  • 04/07/2021

    Arrived on time, well packaged and in good condition. I have the brushless equivalent of this spindle motor and purchased this one for a different project to keep cost down and was surprised that it was slightly quieter than the brushless one. It does run quite hot though which I guess is to be expected. I haven't used it to properly to cut anything out yet but it does function as supposed to. It doesn't come with an on/off switch, but can be stopped by reducing the speed with the controller. I intend controlling the on/off state via relay like I have with my brushless one which is something I can recommend to people. Overall very happy with the purchase and for the price I don't think you would find anything to match.

    Reacties
    Toon origineel
  • 12713
    MX
    06/03/2019

    Good motor and low sound. I have made a box for the electronic.

    Reacties
    Toon origineel
Show:

    Totaal 0 Pagina's

    Ga naar pagina

    Wellicht ben je ook geïnteresseerd in

    recommendation for you
    • US$16.99
    • US$159.99
    • US$12.93
    • US$36.99
    • US$109.69
    • US$13.99
    • US$7.99
    • US$9.99
    • US$53.99
    • US$5.99
    • US$7.99
    • US$13.49
    • US$5.99
    • US$39.99
    • US$6.99
    • US$52.99
    • US$12.79
    • US$22.99