Excellent little plane! This is my second one as I have bought two for both sons to learn to fly. It goes together great. The first one I used all the recommended accessories but I found the 5G recommended servos did not fit the plastic servo tray without major cutting and sanding. For the second plane I used the recommended motor and ESC but for the servos I purchased a pair of K-power P0043 4.3g servos. They dropped into the mount easily without any cutting or modifying. They are slightly smaller than the pre-drilled servo holes in the mount but I just angled the mounting screws slightly and all fitted great. I have not yet flown the second one but the first one flew great. Just move the C of G 12mm further forward that what is recommended as the stock C of G is a bit tail heavy. The online manual states 70mm from the leading edge but I found 58mm was much better. Once balanced correctly it flies perfectly. Ideal to learn on and the motor provides more than enough power. It will cruise around at level flight with less than half power. Highly recommended for the basic flight characteristics for a beginner and the very low price.

Excellent little plane! This is my second one as I have bought two for both sons to learn to fly. It goes together great. The first one I used all the recommended accessories but I found the 5G recommended servos did not fit the plastic servo tray without major cutting and sanding. For the second plane I used the recommended motor and ESC but for the servos I purchased a pair of K-power P0043 4.3g servos. They dropped into the mount easily without any cutting or modifying. They are slightly smaller than the pre-drilled servo holes in the mount but I just angled the mounting screws slightly and all fitted great. I have not yet flown the second one but the first one flew great. Just move the C of G 12mm further forward that what is recommended as the stock C of G is a bit tail heavy. The online manual states 70mm from the leading edge but I found 58mm was much better. Once balanced correctly it flies perfectly. Ideal to learn on and the motor provides more than enough power. It will cruise around at level flight with less than half power. Highly recommended for the basic flight characteristics for a beginner and the very low price.

Excellent little plane! This is my second one as I have bought two for both sons to learn to fly. It goes together great. The first one I used all the recommended accessories but I found the 5G recommended servos did not fit the plastic servo tray without major cutting and sanding. For the second plane I used the recommended motor and ESC but for the servos I purchased a pair of K-power P0043 4.3g servos. They dropped into the mount easily without any cutting or modifying. They are slightly smaller than the pre-drilled servo holes in the mount but I just angled the mounting screws slightly and all fitted great. I have not yet flown the second one but the first one flew great. Just move the C of G 12mm further forward that what is recommended as the stock C of G is a bit tail heavy. The online manual states 70mm from the leading edge but I found 58mm was much better. Once balanced correctly it flies perfectly. Ideal to learn on and the motor provides more than enough power. It will cruise around at level flight with less than half power. Highly recommended for the basic flight characteristics for a beginner and the very low price.

Great little plane. Using a Detrum RXC7 Receiver, a Sonic 1806 2400kv motor, a Flycolor Fairy 30 amp ESC and a Tartu 800mAh 2 cell 45c battery, total overkill but but works great.... check it out.

Great little plane. Using a Detrum RXC7 Receiver, a Sonic 1806 2400kv motor, a Flycolor Fairy 30 amp ESC and a Tartu 800mAh 2 cell 45c battery, total overkill but but works great.... check it out.

Great little plane. Using a Detrum RXC7 Receiver, a Sonic 1806 2400kv motor, a Flycolor Fairy 30 amp ESC and a Tartu 800mAh 2 cell 45c battery, total overkill but but works great.... check it out.

the plastic parts are 3D printed not molded. the main piece that holds the servos is a horrible design. no 5g servo will fit without significant cutting and hacking. the rest of the plane went together well, there are no instructions. I found some picture instructions for it on another site selling it. the CG is too far aft. By the 30% chord rule the cg should be 2 5/16” from the leading edge which balances perfectly with a 2s 1000 and the recommended motor. I have not flown it yet because I’m waiting for bullet connectors for the speed controller but it passes the glide test and seems light enough it should be a good first plane for my son to fly around

the plastic parts are 3D printed not molded. the main piece that holds the servos is a horrible design. no 5g servo will fit without significant cutting and hacking. the rest of the plane went together well, there are no instructions. I found some picture instructions for it on another site selling it. the CG is too far aft. By the 30% chord rule the cg should be 2 5/16” from the leading edge which balances perfectly with a 2s 1000 and the recommended motor. I have not flown it yet because I’m waiting for bullet connectors for the speed controller but it passes the glide test and seems light enough it should be a good first plane for my son to fly around

the plastic parts are 3D printed not molded. the main piece that holds the servos is a horrible design. no 5g servo will fit without significant cutting and hacking. the rest of the plane went together well, there are no instructions. I found some picture instructions for it on another site selling it. the CG is too far aft. By the 30% chord rule the cg should be 2 5/16” from the leading edge which balances perfectly with a 2s 1000 and the recommended motor. I have not flown it yet because I’m waiting for bullet connectors for the speed controller but it passes the glide test and seems light enough it should be a good first plane for my son to fly around

super avion pour débuter

super avion pour débuter

super avion pour débuter

Easy kit to build except the recommended servos are too big to fit the servo tray. Had to cut down the servos and the plastic tray to install the servos. The pushrod wires were too stiff and too large to fit inside the carbon rod fuselage. Had to install one pushrod outside the fuselage

Easy kit to build except the recommended servos are too big to fit the servo tray. Had to cut down the servos and the plastic tray to install the servos. The pushrod wires were too stiff and too large to fit inside the carbon rod fuselage. Had to install one pushrod outside the fuselage

Easy kit to build except the recommended servos are too big to fit the servo tray. Had to cut down the servos and the plastic tray to install the servos. The pushrod wires were too stiff and too large to fit inside the carbon rod fuselage. Had to install one pushrod outside the fuselage

Bought this cheap Kit version as a back yard flyer, when sitting in the alfresco having a beer with me mates. Only build issues were with the Servo Mounting and Weak Hinges. Hot Glue and Blenderm tape sorted that out. Could not believe just how well it flies. Great beginner plane and to practise maneuvering in high wind,, it is a bit more forgiving if crashed,, being so light!

Bought this cheap Kit version as a back yard flyer, when sitting in the alfresco having a beer with me mates. Only build issues were with the Servo Mounting and Weak Hinges. Hot Glue and Blenderm tape sorted that out. Could not believe just how well it flies. Great beginner plane and to practise maneuvering in high wind,, it is a bit more forgiving if crashed,, being so light!

Bought this cheap Kit version as a back yard flyer, when sitting in the alfresco having a beer with me mates. Only build issues were with the Servo Mounting and Weak Hinges. Hot Glue and Blenderm tape sorted that out. Could not believe just how well it flies. Great beginner plane and to practise maneuvering in high wind,, it is a bit more forgiving if crashed,, being so light!

Kit looks complete and should be able to keep the weight below 250g for the new criminlisation of model flyers laws

Kit looks complete and should be able to keep the weight below 250g for the new criminlisation of model flyers laws

Kit looks complete and should be able to keep the weight below 250g for the new criminlisation of model flyers laws

great trainer plane but since I am still not a confident flyer, I opted to cover the foam with color tapes for extra protection and to make it stiffer as well. working On progress. can't wait to fly it.

great trainer plane but since I am still not a confident flyer, I opted to cover the foam with color tapes for extra protection and to make it stiffer as well. working On progress. can't wait to fly it.

great trainer plane but since I am still not a confident flyer, I opted to cover the foam with color tapes for extra protection and to make it stiffer as well. working On progress. can't wait to fly it.

Great little plane to build. really accurate and easy to do. took me less that 2 hours. I purchased the recommended servo’s, ESC, motor and props. The only issue I found was that the recommended servo’s don’t fit out of the box! I had to cut away at the servo mount quite a bit to get them sorted. This took more time than the whole aircraft to build! Either the servo box needs modifying or the correct servo’s recommended. Otherwise a great little plane but I have not got to fly it yet.

Great little plane to build. really accurate and easy to do. took me less that 2 hours. I purchased the recommended servo’s, ESC, motor and props. The only issue I found was that the recommended servo’s don’t fit out of the box! I had to cut away at the servo mount quite a bit to get them sorted. This took more time than the whole aircraft to build! Either the servo box needs modifying or the correct servo’s recommended. Otherwise a great little plane but I have not got to fly it yet.

Great little plane to build. really accurate and easy to do. took me less that 2 hours. I purchased the recommended servo’s, ESC, motor and props. The only issue I found was that the recommended servo’s don’t fit out of the box! I had to cut away at the servo mount quite a bit to get them sorted. This took more time than the whole aircraft to build! Either the servo box needs modifying or the correct servo’s recommended. Otherwise a great little plane but I have not got to fly it yet.

Buen modelo, fiel a la descripción. Recomendable

Buen modelo, fiel a la descripción. Recomendable

Buen modelo, fiel a la descripción. Recomendable