Klantbeoordelingen

Schrijf een beoordeling
  • Alle beoordelingen(19)
  • Afbeeldingen
  • Videos
  • Ster
    • Ster(19)
    • 5 Ster(16)
    • 4 Ster(2)
    • 3 Ster(0)
    • 2 Ster(0)
    • 1 Ster(1)
Sorteren op:
Top recensie
  • Top recensie
  • Meest nuttig
  • meest recent
Recensies alleen uit uw land (United States)
|
Toon origineel

Een deel van de recensie is automatisch vertaald.

  • 10/06/2022

    Receive quickly and in good condition, packaging OK. For assembly, you must also provide a multimeter for the resistors. Indeed, the marking (4 bands of color +1 for tol) is not always clearly visible. For the pitches, the marking on the board is sometimes not very clear. Refer to the photos on the site (ok I re-wrote on see image 2). The resistors are in the tolerance range of 5% error (while the brown band = 1%). The measurement of a 1000 ohm can be 970 ohms or 1001 ohms. A measurement repeating with a precision multimeter should confirm. All electrolytic capacitors are 100uF by 16Vdc, so no need to sort them. The pads for the connection of the elements are not simple to handel for soldering. Care must be taken that the pad does not "go" to the other side while soldering. It's quite a hassle to solder. Be careful not to overheat though. NOTE: JP1 bridge must be closed (open only if there is the option for the charger)! R29 is not installed, it is normal, at least for this version. Ok, the module is working correctly: Note: point V4 is at 5V and not at 1.5V ! Warning: if a key is stuck at startup (boot), the screen remains frozen when the version is displayed. Same with COM. If the COM port is open, this blocks the start of the unit. Otherwise, the COM works fine. Note that for the coils, the value of Z is at x.xx while it is displayed at x.xxxx. Further tests need to be done. For the case: It's really tricky to install. Be careful not to over-tighten the screws or risk cracking - breaking the case (upper or/and lower plate). Be careful not to jam a key. In overall, the product is fine and good. I think the battery connector has to use (take it in account with the to case) this will make the unit autonomous.

    Reacties
    Toon origineel
  • 31/05/2022

    The box was a bit flattened on the outside as there was no additional packaging but internally the cardboard and use of plastic bags inside the box meant that no obvious damage was done to the kit. The instructions are in black and white, not the usual color, that often comes with kits from JYETech. The instructions are clear, well written and appear easy to follow. Look forward to putting it together when I get the chance. Thanks Banggood. I have included a picture of the optional case, which was scratched on arrival but I am hoping it is only superficial and not penetrated the stick on coating.

    Reacties
    Toon origineel
  • 22/07/2022

    I was expecting (free gift) LCR meter, yet came just the acrylic case. So be careful cause link shows the meterkit. Case is fine just a little break near the drilled hole.

    Reacties
    Toon origineel
  • 13/07/2022

    Good LCR meter with its housing case. Easy to mount, although not for novicesas some dexterity is required. Not cheap, but worth the price!

    Reacties
    Toon origineel
  • 11/06/2022

    Great!

    Reacties
    Toon origineel
  • 25/07/2022

    schnelle Lieferung des Bausatzes; unkomplizierter Zusammenbau - sowohl Lötarbeiten als auch mechanische Komplettierung des Meßgerätes. Beim Vergleich mit einem älteren Meßgerät der gleichen Art zeigt es identische Meßergebnisse. Die beigefügten Anleitungen zur Montage und zum Betrieb findet ich ausreichend.

    Reacties
    Toon origineel
  • 06/06/2022

    Montage necessitant un peu de dextérité pour faire de jolies soudures. Un rappel du code couleur des résistances ne serait pas inutile, j'ai utilisé un ohmetre car la lecture des valeurs n'est pas tres facile. Une fois monté le kit fonctionne parfaitement.

    Reacties
    Toon origineel
  • 26/06/2022

    After assembly everything is fine. Well packaging, very fast shipping and delivery. Seller recommended.

    Reacties
    Toon origineel
  • 08/06/2022

    It artived in good condition, and after soldering I tested it and it works fine! Thumbs up for this purchase

    Reacties
    Toon origineel
  • 29/07/2022

    Ok.

    Reacties
    Toon origineel
Show:

    Totaal 0 Pagina's

    Ga naar pagina

    Wellicht ben je ook geïnteresseerd in

    recommendation for you
    • US$5.99
    • US$4.99
    • US$11.99
    • US$4.49
    • US$2.99
    • US$10.99
    • US$2.99
    • US$3.99
    • US$14.99
    • US$14.99