High Power 10W Infrarood IR 940nm SMD LED Chip Light Lamp DIY 4.5-5V
Excellent IR LED. Totally invisible to human eye. So it is really in the 940nm band. Be carefull it becomes reallly really hot. You have to use a good heatsink. You can see the beam with any camera without IR filter. Good for night vision devices
Fitted this with a heatsink to dissipate the heat it generates. Not yet tested, waiting to acquire a runcam night owl to see if it further improves visibility in the dark. I really wish the Low Light PL0075 Lens be available in banggood soon.
have not yet experienced. but the product looks just like the picture. I hope that works the same as described
ok
vol ok
Specs and practical does not add up. 10W at 5V should be 2A, but the specs say 1A. Tested give me 2,5A +- with Product ID: 1123527, 5V step down charger module. Will play with resistors to limit the current and see what I can work out.
Those moduls deliver quite a lot IR illumination ... The emitted light can't be seen at all. But that also means that most of the standard cameras are not very sensitive as well. It very well works with night vision equipment.
maybe not real 940nm, i see some light - wich means below 870nm is some radiation visible
very good power led, don't forget cooling. used for night flying. remove IR filter of camera.
At 940 nm, the 10W is much less than you can imagine! Works well, just not for my DIY project.