Klantbeoordelingen

Schrijf een beoordeling
  • Alle beoordelingen(1438)
  • Afbeeldingen
  • Videos
  • Ster
    • Ster(1438)
    • 5 Ster(1381)
    • 4 Ster(42)
    • 3 Ster(12)
    • 2 Ster(1)
    • 1 Ster(2)
Sorteren op:
Top recensie
  • Top recensie
  • Meest nuttig
  • meest recent
Recensies alleen uit uw land (United States)
|
Toon origineel

Een deel van de recensie is automatisch vertaald.

  • 12/08/2015

    I bought 5 of these units, a small sample to try to replace other units I bought with Banggood that insisted in burning down, one after other and they didn't assume any responsibility to replace them or to solve the problem so I kept purchasing more but then came to a point where it is too much. Actually the reviews on those are mostly repeating what I felt and reported here. Banggood just doesn't allow to write a review after 6 months. Do we have to purchase every six months the same? The current units are installed for two weeks now and seem to perform well. Time will tell if they will endure past the six months...

    Reacties
    Toon origineel
  • 27/07/2016

    Очень удобно. Всегда вижу потребление электричества.

    Reacties
    Toon origineel
  • 12/12/2016

    I ordered 2 of these items and installed them in my electrical cabinet. See picture. The one on the left indicates the house power usage. The one on the right shows the solar power generation. The units are accurate and well build. The display indicates voltage, current, power and energy with autoscaling. Attention : the current direction is not taken into account, so consumed and produced electricity are all add up in the energy meter.

    Reacties (1)
    Toon origineel
  • 02/02/2017

    The input is protected by a 1W 51 ohm resistor and a 0.1uF X2 cap. Inside is the following chipsets: HOLTEK HT1621B 32x4 LCD controller http://www.seeedstudio.com/document/HT1621.pdf Renergy 8208g Single phase metering IC running at 3.579545 MHz http://en.sfkj-tech.com/cp3_1/&productId=83.html ST Micro 32F030F4P6 STM32F0x0 Mainstream ARM Cortex-M0 Value line MCU with 16 Kbytes Flash, 48 MHz CPU running at 8 MHz http://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32f0-series/stm32f0x0-value-line/stm32f030f4.html

    Reacties
    Toon origineel
  • 01/12/2017

    good quality power monitor, it is very easy to connect and use it. the solderings quality is ok and the screen is brilliant and easy to read. I have not checked its precision, but if you need a panel meter for monitoring your power it is a right choice. good value for money Power Monitor di buona qualità, molto facile da collegare e da usare. la qualità delle saldature è ok e lo schermo è brillante e facile da leggere. Non ho controllato la sua precisione, ma se hai bisogno di uno strumento da pannello per monitorare i tuoi consumi è una scelta giusta. buon rapporto qualità prezzo

    Reacties
    Toon origineel
  • 15/08/2015

    Tested and it works , after installation just worked 5 minuted before burned out , the strange is seams burned the display not the electronic ... Buy a new one today I hope to be more lucky

    Reacties
    Toon origineel
  • 18/11/2020

    Очень быстрая доставка, Упаковка стандартно хорошая для Бэнгуда. Показометр работает, отюсирован неплохо, Показания вольметра точные, показания тока верны с точностью в пределах 5% что вполне приемлимо. кнопкой можно задать начальные показания счетчика энергии, сбросить все счетчики, короткое нажатие включает/отключат подсветку. Отличный прибор! Поставил в гараже. Рекомендую!

    Reacties
    Toon origineel
  • 23/11/2019

    Very good display monitor. Tested and working fine. Recommended.

    Reacties
    Toon origineel
  • 11/09/2017

    Meet je verbruik met dit toestel, werkt perfect en aansluiten is geen probleem. Een ware aanrader voor wie zijn verbruik in de gaten wil houden.

    Reacties
    Toon origineel
  • 15/01/2016

    The voltmeter is very accurate. For 229.9V on a multimeter, it shows 229V and for 230.1V on the multimeter it shows 230V. So, it is very accurate, but it disregards the digit after the comma - this leads to a maximum error of about 1V. The amperemeter, has an error of -0.3A. This error is constant over a test period of about 30 minutes and at various loads. The multimeter was recently calibrated. The power calculation is affected by the cosφ, so P =/= U * I. Also, there is an overload alarm - the power section starts to blink if the load exceeeds a user-programmable threshold. The used energy needs more time to observe to result a comparison with the energy-company's meter, but I presume that it will be grossly similar. After a power-down, it holds the last values. The backlight can be enabled/disabled. The products build quality is good enough for the value. The exact model, from the label on the back, is: PEACEFAIR PZEM-061.

    Reacties (1)
    Toon origineel
Show:

    Totaal 0 Pagina's

    Ga naar pagina

    Wellicht ben je ook geïnteresseerd in

    recommendation for you
    • US$137.99
    • US$25.99
    • US$11.99
    • US$51.99
    • US$47.99
    • US$54.99
    • US$99.99
    • US$8.99
    • US$31.99
    • US$13.99
    • US$16.99
    • US$12.99
    • US$12.99
    • US$16.99
    • US$25.99
    • US$122.99
    • US$23.99
    • US$5.00