Klantbeoordelingen

Schrijf een beoordeling
  • Alle beoordelingen(231)
  • Afbeeldingen
  • Videos
  • Ster
    • Ster(231)
    • 5 Star(214)
    • 4 Star(16)
    • 3 Star(1)
    • 2 Star(0)
    • 1 Star(0)
Sorteren op:
Top recensie
  • Top recensie
  • Meest nuttig
  • meest recent
Recensies alleen uit uw land (United States)
|
Toon origineel

Een deel van de recensie is automatisch vertaald.

  • 28/01/2021

    Az előző vásárláson és próbán felbuzdulva vásároltam ezt a másodikat, mellyel egy újabb ledfüzér Wifi vezérlése lesz megoldva. Az utolsó képen a programozáshoz szükséges nyomógomb is látható az előző vásárlásból.

    Reacties
    Toon origineel
  • 30/03/2021

    ótimo produto muito bem embalado

    Reacties
    Toon origineel
  • 24/11/2021

    Все хорошо, быстро пришло.

    Reacties
    Toon origineel
  • 26/04/2019

    The Module came quite fast. But I could not conect it to my Windows 10 computer, unfortunatly. The error-message is in the first image. The CH340 driver was installed and works well with another board containig a CH340, as can be seen in the second image. I'm curios, if the installed chip is a CH340 becaus there is no number on the chip (third image). The signs on CH340 are normally visible very well. Because of this the module can not be used - what a pity! For further developement a switch to bring the ESP8266 into fimrware-upload-mode or modified wiring of the CH340 for automatic upload would be advantegouse.

    Reacties
    Toon origineel
  • 16/01/2020

    Fast delivery. The USB board not designed for programming the ESP01. The ESP01 was delivered with 1M memory. I added a switch to make programming possible.

    Reacties
    Toon origineel
  • 08/01/2021

    Az év végi rendelési idő ellenére 10 napon belül megérkezett. Furcsa módon nem házhoz jött, hanem a közelben lévő csomagpontra. Kedvező ár, jó minőség.

    Reacties
    Toon origineel
  • 12/11/2020

    The description mentions a jumper next to the header.. there are no pins there as you might reasonably expect from the wording. Needs jumpers or switches soldered to the board for program and reset functions, else it's just a USB-serial bridge. Others have detailed this n their reviews of the programmer alone. I bodged some jumpers on for the sake of testing, as shown in the photo. Works welll. Will probably get a better programmer if I continue with the 01s and use this board as a PSU/Serial interface, which it will do nicely. The ESP-01 is decent. Better quality soldering than the "programmer". Four starts rather than three because at the time of writing, this bundle costs less than the ESP-01 or the programmer alone.

    Reacties
    Toon origineel
  • 11/11/2020

    I soldered two sma tactile switches to the usb-serial adapter, this way it becames a programming adapter for PlatforIO or Arduino. To start programming mode, push and hold the IO0 switch and push the RST switch.

    Reacties
    Toon origineel
  • 18/09/2020

    This is great, if you want to flash the ESP01 that comes with it solder in a switch and press it while inserting to PC.

    Reacties
    Toon origineel
  • 24/07/2019

    With programmer button it is much more usable. ;)

    Reacties (1)
    Toon origineel
Show:

    Totaal 0 Pagina's

    Ga naar pagina

    Wellicht ben je ook geïnteresseerd in

    recommendation for you
    • US$3.99
    • US$5.99
    • US$2.99
    • US$6.99
    • US$9.99
    • US$2.99
    • US$3.99
    • US$6.99
    • US$4.99
    • US$4.99
    • US$6.99
    • US$9.99
    • US$5.99
    • US$12.99
    • US$2.79
    • US$7.99
    • US$29.99
    • US$194.99