Purchased this R9M module and R9MM OTA receiver to convert to express LRS long-range, as the Happymodel modules and receivers were out of stock at the time. I followed the instructions from Bardwell on YouTube, and managed to set up all fine. Well packaged, received a great working order and in good time from Banggood.

Purchased this R9M module and R9MM OTA receiver to convert to express LRS long-range, as the Happymodel modules and receivers were out of stock at the time. I followed the instructions from Bardwell on YouTube, and managed to set up all fine. Well packaged, received a great working order and in good time from Banggood.

Purchased this R9M module and R9MM OTA receiver to convert to express LRS long-range, as the Happymodel modules and receivers were out of stock at the time. I followed the instructions from Bardwell on YouTube, and managed to set up all fine. Well packaged, received a great working order and in good time from Banggood.

Good module and receiver if you know how to get it working. There are many firmware versions and they are all very confusing. Note that OTA firmware updates are only possible when using the ACCESS firmware. However, ACCESS firmware is not compatible with most older transmitters because it requires an additional serial connection to the JR module bay E.g. the Jumper T16 Pro does not work with ACCESS, so ACCST firmware is required. This version of firmware is not as well supported by Frsky as ACCESS, but it does work, less the OTA feature.

Good module and receiver if you know how to get it working. There are many firmware versions and they are all very confusing. Note that OTA firmware updates are only possible when using the ACCESS firmware. However, ACCESS firmware is not compatible with most older transmitters because it requires an additional serial connection to the JR module bay E.g. the Jumper T16 Pro does not work with ACCESS, so ACCST firmware is required. This version of firmware is not as well supported by Frsky as ACCESS, but it does work, less the OTA feature.

Good module and receiver if you know how to get it working. There are many firmware versions and they are all very confusing. Note that OTA firmware updates are only possible when using the ACCESS firmware. However, ACCESS firmware is not compatible with most older transmitters because it requires an additional serial connection to the JR module bay E.g. the Jumper T16 Pro does not work with ACCESS, so ACCST firmware is required. This version of firmware is not as well supported by Frsky as ACCESS, but it does work, less the OTA feature.

todo genial, gran producto gran tiempo de entrega. gracias banggood

todo genial, gran producto gran tiempo de entrega. gracias banggood

todo genial, gran producto gran tiempo de entrega. gracias banggood

not yet tested but good sealed.

not yet tested but good sealed.

not yet tested but good sealed.

The set is great but If I bought it seperately, it would be cheaper. I tested the set and lost my plane (flyaway) but not due to the reception, more because of the vtx and plane flying behind me. you have to align the antenna the same way as the receiver antenna. if you plan to align the receiver antenna vertically you need a 90 degree angle adapter for the transmitter antenna to have it also vertically. I use it on my ACCST taranis X9d+ , old transmitter and works fine. I had to install ACCST firmware on TX and RX.

The set is great but If I bought it seperately, it would be cheaper. I tested the set and lost my plane (flyaway) but not due to the reception, more because of the vtx and plane flying behind me. you have to align the antenna the same way as the receiver antenna. if you plan to align the receiver antenna vertically you need a 90 degree angle adapter for the transmitter antenna to have it also vertically. I use it on my ACCST taranis X9d+ , old transmitter and works fine. I had to install ACCST firmware on TX and RX.

The set is great but If I bought it seperately, it would be cheaper. I tested the set and lost my plane (flyaway) but not due to the reception, more because of the vtx and plane flying behind me. you have to align the antenna the same way as the receiver antenna. if you plan to align the receiver antenna vertically you need a 90 degree angle adapter for the transmitter antenna to have it also vertically. I use it on my ACCST taranis X9d+ , old transmitter and works fine. I had to install ACCST firmware on TX and RX.

модуль рабочий, с приемником r9 mm я не смог разобраться

модуль рабочий, с приемником r9 mm я не смог разобраться

модуль рабочий, с приемником r9 mm я не смог разобраться

tutto perfetto

tutto perfetto

tutto perfetto

Parfait !!

Parfait !!

Parfait !!

Parfait 😊

Parfait 😊

Parfait 😊

excelente, perfecto ,genial 👌 👍 😉

excelente, perfecto ,genial 👌 👍 😉

excelente, perfecto ,genial 👌 👍 😉