Works as expected! Setting it up needs a bit of patience. Hold down button when powering up the unit, and let go of the button immediately. The beeps tell you in which mode you're in. Confirm settings with pressing the button. I've used it with my DX8 (gen1). Hold down roller and power up DX8. Go to Trainer menu and set radio to Programmable Master. I used ch7 & 8 as pan & tilt. So I've set ch7 & 8 to slave. Holding down the bind/trainer button will activate the tracker. (I've changed the bind-button on my DX8 for a tumbler switch.) Press the tracker button once to activate it.

Works as expected! Setting it up needs a bit of patience. Hold down button when powering up the unit, and let go of the button immediately. The beeps tell you in which mode you're in. Confirm settings with pressing the button. I've used it with my DX8 (gen1). Hold down roller and power up DX8. Go to Trainer menu and set radio to Programmable Master. I used ch7 & 8 as pan & tilt. So I've set ch7 & 8 to slave. Holding down the bind/trainer button will activate the tracker. (I've changed the bind-button on my DX8 for a tumbler switch.) Press the tracker button once to activate it.

Works as expected! Setting it up needs a bit of patience. Hold down button when powering up the unit, and let go of the button immediately. The beeps tell you in which mode you're in. Confirm settings with pressing the button. I've used it with my DX8 (gen1). Hold down roller and power up DX8. Go to Trainer menu and set radio to Programmable Master. I used ch7 & 8 as pan & tilt. So I've set ch7 & 8 to slave. Holding down the bind/trainer button will activate the tracker. (I've changed the bind-button on my DX8 for a tumbler switch.) Press the tracker button once to activate it.

Nice

Nice

Nice