Work as described. But provided pinout is wrong. The correct pinout is in the picture below. Happy flying

Work as described. But provided pinout is wrong. The correct pinout is in the picture below. Happy flying

Work as described. But provided pinout is wrong. The correct pinout is in the picture below. Happy flying

EMachine Pro DVR Instructions V0.1 ================================== Button Layout ----------------------------------- | ------------ | | | SD | |---- | | card | |---- | | | |---- CABLES | !------------! |---- | < [] > |---- | Prev Enter Next | |-----------------------------------| Cable Connector Type: JST-SH, 1mm pitch, 2 x 4-pin, 1 x 6 pin Power (3.5V to 5V, 180mA). ------------------------- Apply the power cleanly, otherwise the device may lock up. Device powers up into standby mode, with blue LED ON continuously. Powerup Time: wait 8 or 9 secs, before recording can start. Recordings, following the last auto-save operation (ie. every 10, 20, or 30mins), are lost if power is removed before the recording is stopped. The Menus ---------- . To Enter the Menus: Long press the [] button to cycle between: Video Menu -> Setup menu -> Exit. Video Menu: Size(Video Resolution),Sound Rec (On/Off), Video Time (None,10,20,30mins). (Note: Video Time really means AutoSave time. Recommend set to 10mins). Setup Menu: Format, Language, SysReset, LightFreq(50/60Hz), TV(PAL/NTSC) Recording --------- . To Start Video Recording: Short press > button. LED flashes. . To Stop Video Recording: Short press > button again. LED lights continuously. Playback Mode ------------- . To Enter Playback mode: Long press < button (3 secs). . To Exit Playback mode: Long press < button again. . To select a video: short press < or > and press [] to play it. . To delete a video: select the video and long press [] to enter a sub menu, which includes "Delete Video" and "Volume set". Select Delete Video and then Delete Single. . During playback, press [] to pause/resume playback. . To abort playback, press [] to pause and then press > (or <) to abort. . During playback, press < to play forward at X1, X2, X4 or X8 speed. . During playback, press > to play backwards at X1, X2, X4 or X8 speed. Note: Minimum AutoSave time is 10mins. I'd prefer a shorter option, like 2mins.

EMachine Pro DVR Instructions V0.1 ================================== Button Layout ----------------------------------- | ------------ | | | SD | |---- | | card | |---- | | | |---- CABLES | !------------! |---- | < [] > |---- | Prev Enter Next | |-----------------------------------| Cable Connector Type: JST-SH, 1mm pitch, 2 x 4-pin, 1 x 6 pin Power (3.5V to 5V, 180mA). ------------------------- Apply the power cleanly, otherwise the device may lock up. Device powers up into standby mode, with blue LED ON continuously. Powerup Time: wait 8 or 9 secs, before recording can start. Recordings, following the last auto-save operation (ie. every 10, 20, or 30mins), are lost if power is removed before the recording is stopped. The Menus ---------- . To Enter the Menus: Long press the [] button to cycle between: Video Menu -> Setup menu -> Exit. Video Menu: Size(Video Resolution),Sound Rec (On/Off), Video Time (None,10,20,30mins). (Note: Video Time really means AutoSave time. Recommend set to 10mins). Setup Menu: Format, Language, SysReset, LightFreq(50/60Hz), TV(PAL/NTSC) Recording --------- . To Start Video Recording: Short press > button. LED flashes. . To Stop Video Recording: Short press > button again. LED lights continuously. Playback Mode ------------- . To Enter Playback mode: Long press < button (3 secs). . To Exit Playback mode: Long press < button again. . To select a video: short press < or > and press [] to play it. . To delete a video: select the video and long press [] to enter a sub menu, which includes "Delete Video" and "Volume set". Select Delete Video and then Delete Single. . During playback, press [] to pause/resume playback. . To abort playback, press [] to pause and then press > (or <) to abort. . During playback, press < to play forward at X1, X2, X4 or X8 speed. . During playback, press > to play backwards at X1, X2, X4 or X8 speed. Note: Minimum AutoSave time is 10mins. I'd prefer a shorter option, like 2mins.

EMachine Pro DVR Instructions V0.1 ================================== Button Layout ----------------------------------- | ------------ | | | SD | |---- | | card | |---- | | | |---- CABLES | !------------! |---- | < [] > |---- | Prev Enter Next | |-----------------------------------| Cable Connector Type: JST-SH, 1mm pitch, 2 x 4-pin, 1 x 6 pin Power (3.5V to 5V, 180mA). ------------------------- Apply the power cleanly, otherwise the device may lock up. Device powers up into standby mode, with blue LED ON continuously. Powerup Time: wait 8 or 9 secs, before recording can start. Recordings, following the last auto-save operation (ie. every 10, 20, or 30mins), are lost if power is removed before the recording is stopped. The Menus ---------- . To Enter the Menus: Long press the [] button to cycle between: Video Menu -> Setup menu -> Exit. Video Menu: Size(Video Resolution),Sound Rec (On/Off), Video Time (None,10,20,30mins). (Note: Video Time really means AutoSave time. Recommend set to 10mins). Setup Menu: Format, Language, SysReset, LightFreq(50/60Hz), TV(PAL/NTSC) Recording --------- . To Start Video Recording: Short press > button. LED flashes. . To Stop Video Recording: Short press > button again. LED lights continuously. Playback Mode ------------- . To Enter Playback mode: Long press < button (3 secs). . To Exit Playback mode: Long press < button again. . To select a video: short press < or > and press [] to play it. . To delete a video: select the video and long press [] to enter a sub menu, which includes "Delete Video" and "Volume set". Select Delete Video and then Delete Single. . During playback, press [] to pause/resume playback. . To abort playback, press [] to pause and then press > (or <) to abort. . During playback, press < to play forward at X1, X2, X4 or X8 speed. . During playback, press > to play backwards at X1, X2, X4 or X8 speed. Note: Minimum AutoSave time is 10mins. I'd prefer a shorter option, like 2mins.