Work as described. But provided pinout is wrong. The correct pinout is in the picture below. Happy flying

Work as described. But provided pinout is wrong. The correct pinout is in the picture below. Happy flying

Work as described. But provided pinout is wrong. The correct pinout is in the picture below. Happy flying

EMachine Pro DVR Instructions V0.1 ================================== Button Layout ----------------------------------- | ------------ | | | SD | |---- | | card | |---- | | | |---- CABLES | !------------! |---- | < [] > |---- | Prev Enter Next | |-----------------------------------| Cable Connector Type: JST-SH, 1mm pitch, 2 x 4-pin, 1 x 6 pin Power (3.5V to 5V, 180mA). ------------------------- Apply the power cleanly, otherwise the device may lock up. Device powers up into standby mode, with blue LED ON continuously. Powerup Time: wait 8 or 9 secs, before recording can start. Recordings, following the last auto-save operation (ie. every 10, 20, or 30mins), are lost if power is removed before the recording is stopped. The Menus ---------- . To Enter the Menus: Long press the [] button to cycle between: Video Menu -> Setup menu -> Exit. Video Menu: Size(Video Resolution),Sound Rec (On/Off), Video Time (None,10,20,30mins). (Note: Video Time really means AutoSave time. Recommend set to 10mins). Setup Menu: Format, Language, SysReset, LightFreq(50/60Hz), TV(PAL/NTSC) Recording --------- . To Start Video Recording: Short press > button. LED flashes. . To Stop Video Recording: Short press > button again. LED lights continuously. Playback Mode ------------- . To Enter Playback mode: Long press < button (3 secs). . To Exit Playback mode: Long press < button again. . To select a video: short press < or > and press [] to play it. . To delete a video: select the video and long press [] to enter a sub menu, which includes "Delete Video" and "Volume set". Select Delete Video and then Delete Single. . During playback, press [] to pause/resume playback. . To abort playback, press [] to pause and then press > (or <) to abort. . During playback, press < to play forward at X1, X2, X4 or X8 speed. . During playback, press > to play backwards at X1, X2, X4 or X8 speed. Note: Minimum AutoSave time is 10mins. I'd prefer a shorter option, like 2mins.

EMachine Pro DVR Instructions V0.1 ================================== Button Layout ----------------------------------- | ------------ | | | SD | |---- | | card | |---- | | | |---- CABLES | !------------! |---- | < [] > |---- | Prev Enter Next | |-----------------------------------| Cable Connector Type: JST-SH, 1mm pitch, 2 x 4-pin, 1 x 6 pin Power (3.5V to 5V, 180mA). ------------------------- Apply the power cleanly, otherwise the device may lock up. Device powers up into standby mode, with blue LED ON continuously. Powerup Time: wait 8 or 9 secs, before recording can start. Recordings, following the last auto-save operation (ie. every 10, 20, or 30mins), are lost if power is removed before the recording is stopped. The Menus ---------- . To Enter the Menus: Long press the [] button to cycle between: Video Menu -> Setup menu -> Exit. Video Menu: Size(Video Resolution),Sound Rec (On/Off), Video Time (None,10,20,30mins). (Note: Video Time really means AutoSave time. Recommend set to 10mins). Setup Menu: Format, Language, SysReset, LightFreq(50/60Hz), TV(PAL/NTSC) Recording --------- . To Start Video Recording: Short press > button. LED flashes. . To Stop Video Recording: Short press > button again. LED lights continuously. Playback Mode ------------- . To Enter Playback mode: Long press < button (3 secs). . To Exit Playback mode: Long press < button again. . To select a video: short press < or > and press [] to play it. . To delete a video: select the video and long press [] to enter a sub menu, which includes "Delete Video" and "Volume set". Select Delete Video and then Delete Single. . During playback, press [] to pause/resume playback. . To abort playback, press [] to pause and then press > (or <) to abort. . During playback, press < to play forward at X1, X2, X4 or X8 speed. . During playback, press > to play backwards at X1, X2, X4 or X8 speed. Note: Minimum AutoSave time is 10mins. I'd prefer a shorter option, like 2mins.

EMachine Pro DVR Instructions V0.1 ================================== Button Layout ----------------------------------- | ------------ | | | SD | |---- | | card | |---- | | | |---- CABLES | !------------! |---- | < [] > |---- | Prev Enter Next | |-----------------------------------| Cable Connector Type: JST-SH, 1mm pitch, 2 x 4-pin, 1 x 6 pin Power (3.5V to 5V, 180mA). ------------------------- Apply the power cleanly, otherwise the device may lock up. Device powers up into standby mode, with blue LED ON continuously. Powerup Time: wait 8 or 9 secs, before recording can start. Recordings, following the last auto-save operation (ie. every 10, 20, or 30mins), are lost if power is removed before the recording is stopped. The Menus ---------- . To Enter the Menus: Long press the [] button to cycle between: Video Menu -> Setup menu -> Exit. Video Menu: Size(Video Resolution),Sound Rec (On/Off), Video Time (None,10,20,30mins). (Note: Video Time really means AutoSave time. Recommend set to 10mins). Setup Menu: Format, Language, SysReset, LightFreq(50/60Hz), TV(PAL/NTSC) Recording --------- . To Start Video Recording: Short press > button. LED flashes. . To Stop Video Recording: Short press > button again. LED lights continuously. Playback Mode ------------- . To Enter Playback mode: Long press < button (3 secs). . To Exit Playback mode: Long press < button again. . To select a video: short press < or > and press [] to play it. . To delete a video: select the video and long press [] to enter a sub menu, which includes "Delete Video" and "Volume set". Select Delete Video and then Delete Single. . During playback, press [] to pause/resume playback. . To abort playback, press [] to pause and then press > (or <) to abort. . During playback, press < to play forward at X1, X2, X4 or X8 speed. . During playback, press > to play backwards at X1, X2, X4 or X8 speed. Note: Minimum AutoSave time is 10mins. I'd prefer a shorter option, like 2mins.

incorrectly connect + and - cable to the key socket, DVR is too hot. I think DVR has burned. Fortunately not burning. This is because Banggood sends a different DVR from the image. different types. And there is no manual. After much effort, DVR can be used and very good, even after almost burning it. I use this DVR with https://www.banggood.com/FPV-4_3-Inch-TFT-LCD-Monitor-Screen-For-RC-Models-p-940817.html?rmmds=category, to show the raster of the receiver when there is no video signal. Not a black screen.

incorrectly connect + and - cable to the key socket, DVR is too hot. I think DVR has burned. Fortunately not burning. This is because Banggood sends a different DVR from the image. different types. And there is no manual. After much effort, DVR can be used and very good, even after almost burning it. I use this DVR with https://www.banggood.com/FPV-4_3-Inch-TFT-LCD-Monitor-Screen-For-RC-Models-p-940817.html?rmmds=category, to show the raster of the receiver when there is no video signal. Not a black screen.

incorrectly connect + and - cable to the key socket, DVR is too hot. I think DVR has burned. Fortunately not burning. This is because Banggood sends a different DVR from the image. different types. And there is no manual. After much effort, DVR can be used and very good, even after almost burning it. I use this DVR with https://www.banggood.com/FPV-4_3-Inch-TFT-LCD-Monitor-Screen-For-RC-Models-p-940817.html?rmmds=category, to show the raster of the receiver when there is no video signal. Not a black screen.

Just a good dvr with smaller size than others. Fit inside my VR007 Pro goggles. Video recorded and saved in .AVI format.

Just a good dvr with smaller size than others. Fit inside my VR007 Pro goggles. Video recorded and saved in .AVI format.

Just a good dvr with smaller size than others. Fit inside my VR007 Pro goggles. Video recorded and saved in .AVI format.

found the Eachine VR006 that i mod with this small recorder. https://m.facebook.com/story.php?story_fbid=186623505483887&id=129559171190321

found the Eachine VR006 that i mod with this small recorder. https://m.facebook.com/story.php?story_fbid=186623505483887&id=129559171190321

found the Eachine VR006 that i mod with this small recorder. https://m.facebook.com/story.php?story_fbid=186623505483887&id=129559171190321

Pros: - easy to use! - supports 32GB cards (4 class only!!) - overall works very ok! Cons: - only 640x480 :( - doesn't support 10 class microsd cards! - video codec: MPJG - very inefficient compared to other video codec overall 4/5.

Pros: - easy to use! - supports 32GB cards (4 class only!!) - overall works very ok! Cons: - only 640x480 :( - doesn't support 10 class microsd cards! - video codec: MPJG - very inefficient compared to other video codec overall 4/5.

Pros: - easy to use! - supports 32GB cards (4 class only!!) - overall works very ok! Cons: - only 640x480 :( - doesn't support 10 class microsd cards! - video codec: MPJG - very inefficient compared to other video codec overall 4/5.

DVR piccolissimo ma ottimo per droni racing e per tutte le applicazioni che richiedono leggerezza.....comprato gia' altre volte e sempre soddisfatto.......

DVR piccolissimo ma ottimo per droni racing e per tutte le applicazioni che richiedono leggerezza.....comprato gia' altre volte e sempre soddisfatto.......

DVR piccolissimo ma ottimo per droni racing e per tutte le applicazioni che richiedono leggerezza.....comprato gia' altre volte e sempre soddisfatto.......

The 4th 5th should have been. Please send me one.

The 4th 5th should have been. Please send me one.

The 4th 5th should have been. Please send me one.

As far as I can tell this is the same as the Eachine ProDVR but without a case. If I had my time again I'd buy the Eachine version.

As far as I can tell this is the same as the Eachine ProDVR but without a case. If I had my time again I'd buy the Eachine version.

As far as I can tell this is the same as the Eachine ProDVR but without a case. If I had my time again I'd buy the Eachine version.

ho preso questo DVR per modificare i miei fatshark! Devo ammettere che per il prezzo non mi aspettavo un risultato tale! È pratico, semplice da usare e intuitivo, la registrazione in tempo reale non aggiunge ritardo all’immagine e questo fa sì che sia possibile usarlo in “serie” alla ricevente potendo interagire con il dvr mentre si vola!! Ovviamente la qualità di registrazione essendo praticamente quella della Cam non è in alta definizione però non posso che ritenermi super soddisfatto!!

ho preso questo DVR per modificare i miei fatshark! Devo ammettere che per il prezzo non mi aspettavo un risultato tale! È pratico, semplice da usare e intuitivo, la registrazione in tempo reale non aggiunge ritardo all’immagine e questo fa sì che sia possibile usarlo in “serie” alla ricevente potendo interagire con il dvr mentre si vola!! Ovviamente la qualità di registrazione essendo praticamente quella della Cam non è in alta definizione però non posso che ritenermi super soddisfatto!!

ho preso questo DVR per modificare i miei fatshark! Devo ammettere che per il prezzo non mi aspettavo un risultato tale! È pratico, semplice da usare e intuitivo, la registrazione in tempo reale non aggiunge ritardo all’immagine e questo fa sì che sia possibile usarlo in “serie” alla ricevente potendo interagire con il dvr mentre si vola!! Ovviamente la qualità di registrazione essendo praticamente quella della Cam non è in alta definizione però non posso che ritenermi super soddisfatto!!