Klantbeoordelingen

Schrijf een beoordeling
  • Alle beoordelingen(247)
  • Afbeeldingen
  • Videos
  • Ster
    • Ster(247)
    • 5 Ster(233)
    • 4 Ster(3)
    • 3 Ster(2)
    • 2 Ster(4)
    • 1 Ster(5)
Sorteren op:
Top recensie
  • Top recensie
  • Meest nuttig
  • meest recent
Recensies alleen uit uw land (United States)
|
Toon origineel

Een deel van de recensie is automatisch vertaald.

  • 26/10/2021

    Had given up trying to bend a LD-002H to my will..fitted a proper LED driver, masked the LCD with copper tape etc. Still had UV bleed through forming skin and artifacts in the vat which affected the print. next step was a new LCD, still with no guarantee of success. I ordered the Halot as I still have faith generally in Creality, I have 5 of their printers. Out of the box, performed flawlessly ! EXCELLENT quality prints. 1. First, update the firmware to the latest version. Much better than the version supplied. If you can't see the wireless upgrade option, the firmware is just to early. Download from Creality and use the stick. 2. DO NOT look for LED time, base layers etc. in the software. This is all done on the Halot itself. You don't have to bake these settings into the model files now. At first I thought WTF... then very quickly realised sooo much better. 3. There is no calibration card, no matter how many times you pull the packing apart :D . use a piece of A4 paper, after removing the protective plastic, unlike the video... Still a messy way to make models, but the results are awesome !

    Reacties (1)
    Toon origineel
  • 23/08/2021

    Primeiro teste foi positivo. Imprimi um pokemon Vulpix com 1,5cm altura que modelei e usei o fatiador Lychee para fatiar e tive que usar um pen drive USB próprio pois não veio pen drive dentro da embalagem. Mas acredito que seja possível colocar os suportes em um fatiador qualquer e depois abrir o stl no fatiador próprio da halot One. Isso deve permitir mandar direto do pc para a impressora através do WIFI dela. First test was positive. I printed a pokemon Vulpix with 1.5 cm height that I modeled and used the Lychee slicer to slice and I had to use a USB flash drive myself because there was no flash drive inside the package. But I believe that it is possible to put the supports in any slicer and then open the stl in halot One's own slicer. This should allow sending it directly from the pc to the printer through its WIFI.

    Reacties
    Toon origineel
  • 10/07/2021

    O transporte foi muito rápido e a impressora chegou em ótimas condições. O produto foi taxado, mas na hora da compra optei pelo seguro tarifário da Banggood e está dando tudo certo para receber a restituição. A equipe de suporte ao cliente da Banggood é muito boa, responde rapidamente e resolve. Quanto ao produto em si, é uma ótima impressora, mas ainda está em fase de desenvolvimento do software. Mesmo assim é o melhor custo benefício do mercado para uma impressora 3D com LCD mono com 2k de resolução. Recomendo!

    Reacties
    Toon origineel
  • 06/02/2022

    Sehr guter Drucker zu einer unschlagbaren Preis-Leistung (117€ bezahlt). Versand sehr sicher verpackt in 2-3 tagen mit DHL. Super! Die Anfangs schlechte Firmware und HalotBox (slicer) sind zum Zeitpunkt des Reviews gut verbessert worden. Insbesondere kommen ständig Updates und Neuerungen - für den Preis wieder sehr lobenswert von Creality. Benutzung mit dem großem Touch Display und Wlan sind ein Traum, ich bin begeistert. Druckergebnisse sind nach erstem Leveln und Einstellen auch sehr gut. Der Arbeitsprozess SLA gegenüber einem FDM ist natürlich etwas aufwändiger die Ergebnisse sprechen aber für sich. Weiter so Banggood und Creality.

    Reacties
    Toon origineel
  • 14/01/2022

    embalagem muito boa!! atualização via Wi-Fi ok tudo ok veio com pen ;) muito obrigado banggood posto aí as fotos para os meus amigos PORTUGUESES ;) está encomenda correu muito bem ;)

    Reacties (2)
    Toon origineel
  • 10/02/2022

    very well worked and good packaging as well... nothing is broken. Print a plastic spatoula or buy one because the one that has got inside is metal, buy also a good filtering mask and gloves Nitrile, and protection glasses. Bioethanol is working like isopropyl alcohol as well and it is cheaper. I use both, isopropyl on second wash, or buy water washable ...the printer is 🤘 rocking

    Reacties
    Toon origineel
  • 21/01/2022

    uno spettacolo! Alla prima stampa è andata subito benissimo anche da principiante! Stampante molto compatta, piatto di stama non molto grande ma basta adattarsi.

    Reacties
    Toon origineel
  • 18/03/2022

    works out of the Box. latest Version of the creality slicer is a usable build. nothing to complain. good print results for a low budget. Delivery was also very quick from Cz Warehouse.

    Reacties
    Toon origineel
  • 05/03/2022

    Una impresora de resina de genial. Muy intuitiva, pantalla táctil con respuesta excelente. La calidad obtenida es muy buena. Una buena compra. Llegó rápido y todo perfecto.

    Reacties
    Toon origineel
  • 21/02/2022

    Sehr guter Resin Drucker zu einem Spitzen Preis. es ist zwar mein erster Drucker im Bereich Resin , durch YouTube Recherche welche Programm zum Slicen wie man Stützstrukuren setzt uvm., Perfekt

    Reacties
    Toon origineel
Show:

    Totaal 0 Pagina's

    Ga naar pagina

    Wellicht ben je ook geïnteresseerd in

    recommendation for you
    • US$2.09
    • US$1.69
    • US$23.99
    • US$5.99
    • US$2.39
    • US$2.29
    • US$29.99
    • US$219.00
    • US$259.00
    • US$483.67