Klantbeoordelingen

4.94 van5
Schrijf een beoordeling
  • Alle beoordelingen(1762)
  • Afbeeldingen
  • Videos
  • Ster
    • Ster(1762)
    • 5 Star(1663)
    • 4 Star(90)
    • 3 Star(7)
    • 2 Star(1)
    • 1 Star(1)
Sorteren op:
Top recensie
  • Top recensie
  • Meest nuttig
  • meest recent
Recensies alleen uit uw land (Netherlands)
|
Toon origineel

Een deel van de recensie is automatisch vertaald.

  • 24/09/2020

    This is my first 3D printer. It comes very well packed. Instructions are clear and it's quite easy to assemble, eventually you will find tons of video of assembly, plus there is a big community around this printer, with advice and improvements. If I can give some advice : - The tools are provided, but if you are well equiped, use yours, always work with good tools. - Torque in a criss-cross pattern - Do not over torque - All axis should move smoothly, without play nor hard spot. - If you get hard spot or excessive play, check the belt tensioner and the excentric over the bearings - Bed leveling is way easier with a set of feeler gauges, I used 0.10 to 0.15mm I really appreciate that 60g of PLA was provided to make some trials. Easy to operate, I found a calibration model on thingiverse and printed it. I was very impressed by the quality and precision for a first print. Noise comes mostly from the hotend's fan and it is tolerable. To sum up, I highly recommend this printer.

    Reacties (2)
    Toon origineel
  • 28/12/2020

    Il prodotto è eccellente, secondo me best buy,ha una qualità di stampa impressionante, lo schermo è user-friendly, infatti neanche leggendo le istruzioni era intuitivo, mentre per l'assemblaggio ho avuto qualche problema:il fine corsa del asse Z l'avevo messo troppo basso , di conseguenza non riuscivo a livellare bene il piatto di stampa poiché si scontrava contro lo stepper-motor dietro, quindi dopo un ora avevo capito il problema, il secondo problema riscontrato era che i cuscinetti in alcune parti(hotend,piatto di stampa) erano troppo allentate oppure troppo strette, io essendo un principiante non sapevo come aggiustarlo( il piano di stampa traballava),di conseguenza mi sono rivolto a inthernet, per il resto apparte questi inconvenienti mi ci sono trovato benissimo, anche perché il Nozzle si riscalda velocemente, il piatto un po' meno, la macchina dispone anche di un comodo cassetto degli attrezzi, e delle manopole per tensionare le cinghie più facilmente,Ve la consiglio come stampante 3D sia che siate del principianti che degli esperti , però se vedete che il piano traballa stringetelo con la chiave in dotazione.

    Reacties (1)
    Toon origineel
  • 25/12/2020

    Excelent packaging. Very nice presentation and quality/price ratio. Does work already out of the box. My first 3D printer, satisfied with product, have probably over 50+ hours of printing time in first 2 weeks. Would recomend to buy, just be patient with bed leveling and clean bed for better adhesion.

    Reacties (1)
    Toon origineel
  • 23/02/2021

    This is my first 3D printed and i can't be more happier! It took me 1 hour to assemble and adjust everything. The machine works perfect. For everyone who wants to buy a 3D printer: Go for it, you can't do nothing wrong. There are hundrets of videos and Tutorials in youtube für this Special printer.

    Reacties (1)
    Toon origineel
  • 24/11/2020

    A bit strange thing: Once I opened package and started counting items if nothing is missing I noticed there was one screw missing on coupler and one screw for tensioner. After one more time checking the box I found the missing coupler screw after all of packaging material in box corner. Also I found tensioner screw kinda stuck in tensioner unit itself so it was all fine in the end so if you are missing some screws they might not be in the bag. I also had a bit of issue with logistics as somebody wrote 77 with black marker on the package right on top of my phone number so it took 5 aditional days (3 work days) to sort things out with logistics firm as they didn't noticed the number that was basically unreadable. About printer: Once everything is done it works nice out of the box. First print came out from supplied sd-card without any tweaks Overall great product for nice price. Would recommend.

    Reacties
    Toon origineel
  • VIP4
    IE
    19/08/2020

    Excellent 3d printer. Print quality is excellent, even at 0.2 res, using PLA. It is a pleasure to put together, thanks to the very good instruction manual. I love the colour LCD screen. Makes it very user friendly. Big upgrade compared to the ender 3 pro. Love this printer. Would recommend it to anyone.

    Reacties (1)
    Toon origineel
  • 20/05/2021

    Very impressed. Easy to assemble (I found YouTube videos more helpful than the included manual) and I got rather good prints right from the start (again after following bed leveling advice from YouTube tutorials), using default settings for an Ender 3 in Cura on a Mac. Still have a lot to learn but I'm very pleased with the quality out of the box as a first time 3D printer user.

    Reacties
    Toon origineel
  • 08/05/2021

    It's alive! Banggood delivered in under a week UK-UK. Supremely well packed. A couple of successful prints so far but much tuning to be done. The Z stepper motor doesn't sit flush against the profile. Took me over an hour messing around with shims to make it sit down. The wiring under the print bed fouls on the Y stepper. Bad design and not enough clearance. Pain in the a** to level the first time because of this, and the stock springs are rubbish. Order the sturdier yellow ones and it'll make leveling a one off event. The hot end fan is pretty noisy. But for the money, it's awesome and a with a few tweaks it can complete with very expensive printers.

    Reacties
    Toon origineel
  • 11/04/2021

    Le istruzioni presenti nella scatola sono in inglese, inoltre sulla pendrive c'è un video di come si monta la stampante. Il montaggio è abbastanza semplice, bisogna solo stare attenti alla perpendicolarità dei pezzi e all'allineamento della struttura. La qualità di stampa dipende molto dall'assemblaggio. Su internet ci sono diversi firmware custom che migliorano le prestazioni della stampante. La stampante che ho ricevuto monta la scheda madre 4.2.2 e non la 4.2.7. Ho avuto un piccolo problema con un cavetto che era danneggiato e mi è stato inviato subito un cavetto sostitutivo, ottimo servizio assistenza. Conviene sostituire subito le molle originali del letto di stampa poichè sono troppo morbide e la stampante perde facilmente il livellamento. Ottimo il fatto che nella confezione sia presente anche un pò di filamento per provare subito la stampante. Su internet si trovano diversi file da stampare per vedere se la stampante è stampa correttamente o ha problemi sulla meccanica o sulle impostazioni di stampa. Consiglio l'acquisto. A questo prezzo non si trovano stampanti che stampano così accuratamente.

    Reacties
    Toon origineel
  • 24/03/2021

    i have fixid and checked all details. when i give electricity power supply is blowed up. 230 volt switch was open but when i open it, it blowed up. how is possible. i will share it all my network. now i need to new power supply. i have shared this site with my director friends for shopping but they gave up because this trouble

    Reacties
    Toon origineel
Show:

    Totaal 0 Pagina's

    Ga naar pagina

    Wellicht ben je ook geïnteresseerd in

    recommendation for you
    • US$196.00
    • US$154.99
    • US$179.99
    • US$18.99
    • US$379.00
    • US$279.00
    • US$129.99
    • US$186.99
    • US$579.00
    • US$18.99
    • US$38.99
    • US$10.99
    • US$459.00
    • US$10.99
    • US$17.99
    • US$42.99
    • US$47.29
    • US$239.00