Thank you , I'm glad the shipment arrived complete in good condition with little delay maybe because of Covid19 pandemic l complete the installation and setting within less one hour And here is the first test of 3D printing. But I will delay the CNC And Laser for a while until I fully control the3D Printing because it's the main function for me.

Thank you , I'm glad the shipment arrived complete in good condition with little delay maybe because of Covid19 pandemic l complete the installation and setting within less one hour And here is the first test of 3D printing. But I will delay the CNC And Laser for a while until I fully control the3D Printing because it's the main function for me.

Thank you , I'm glad the shipment arrived complete in good condition with little delay maybe because of Covid19 pandemic l complete the installation and setting within less one hour And here is the first test of 3D printing. But I will delay the CNC And Laser for a while until I fully control the3D Printing because it's the main function for me.

Printer showed up much faster than expected. About two weeks. Was very well packed and easy to put together if you are at all handy. I have used the laser and the printer and they both work well.

Printer showed up much faster than expected. About two weeks. Was very well packed and easy to put together if you are at all handy. I have used the laser and the printer and they both work well.

Printer showed up much faster than expected. About two weeks. Was very well packed and easy to put together if you are at all handy. I have used the laser and the printer and they both work well.

it’s a great machine and I love it it’s a good price and fast delivery and packed well I’m loving it

it’s a great machine and I love it it’s a good price and fast delivery and packed well I’m loving it

it’s a great machine and I love it it’s a good price and fast delivery and packed well I’m loving it

buenas tardes, he recibido el producto muy bien envuelto y en un plazo record, asi mismo quiero hacerle saber que la rueda trasera izquierda de la cama, cuando se desplaza hacia atras tropieza con el motor coordenadas "y", me gustaria que me buscasen una solucion, dado que no puedo alinearla correctamente, creo que he adquirido un buen aparato. le he tenido que quitar la rueda y poner una mariposa como tuerca

buenas tardes, he recibido el producto muy bien envuelto y en un plazo record, asi mismo quiero hacerle saber que la rueda trasera izquierda de la cama, cuando se desplaza hacia atras tropieza con el motor coordenadas "y", me gustaria que me buscasen una solucion, dado que no puedo alinearla correctamente, creo que he adquirido un buen aparato. le he tenido que quitar la rueda y poner una mariposa como tuerca

buenas tardes, he recibido el producto muy bien envuelto y en un plazo record, asi mismo quiero hacerle saber que la rueda trasera izquierda de la cama, cuando se desplaza hacia atras tropieza con el motor coordenadas "y", me gustaria que me buscasen una solucion, dado que no puedo alinearla correctamente, creo que he adquirido un buen aparato. le he tenido que quitar la rueda y poner una mariposa como tuerca

this was my first purchase from Banggood. A little scary but turned out great. make sure all the screws are done up in the preassembled stuff and tighten the wheels on the runners. watch YouTube videos on how to set the v-slot wheels up. There are two tiny hex screws that hold the hot end in place hidden behind the cooling fan. Both of these were loose in mine and I hadn’t realised it was wrong so had a week of poor results. once I got it tightened into place the machine has been a dream. Use the included software where you can. the new cura software works but is a pain to get setup. Most PLA prints well with 205C hot end and 45C bed. Nylon230 by Taulman works but not really suitable for small parts (it’s too soft and flimsy). ABS is still difficult to work with but it does work. I also got the a a Creality enclosure which fits perfectly around it and is ideal for keeping smells and heat in. I thought purchasing through Banggood would be risky but it turned out to be excellent. The picture is of the first two prints before the hot end was even fitted properly!! BTW, if you want really high def prints, use 0.05mm (yes, 0.05, not 0.5 or 0.1). The steppers work great with it and translucent and clear materials REALLY come out translucent and clear. I’m not kidding, it’s amazing!!! This is a superb machine. don’t expect to cut material with the laser and don’t cut too deep into materials with the CNC and you’ll be fine. Get a CNC rate calculator to make sure you don’t set your feed rate too high for the bit and material you are working with. Feel free to ask questions.

this was my first purchase from Banggood. A little scary but turned out great. make sure all the screws are done up in the preassembled stuff and tighten the wheels on the runners. watch YouTube videos on how to set the v-slot wheels up. There are two tiny hex screws that hold the hot end in place hidden behind the cooling fan. Both of these were loose in mine and I hadn’t realised it was wrong so had a week of poor results. once I got it tightened into place the machine has been a dream. Use the included software where you can. the new cura software works but is a pain to get setup. Most PLA prints well with 205C hot end and 45C bed. Nylon230 by Taulman works but not really suitable for small parts (it’s too soft and flimsy). ABS is still difficult to work with but it does work. I also got the a a Creality enclosure which fits perfectly around it and is ideal for keeping smells and heat in. I thought purchasing through Banggood would be risky but it turned out to be excellent. The picture is of the first two prints before the hot end was even fitted properly!! BTW, if you want really high def prints, use 0.05mm (yes, 0.05, not 0.5 or 0.1). The steppers work great with it and translucent and clear materials REALLY come out translucent and clear. I’m not kidding, it’s amazing!!! This is a superb machine. don’t expect to cut material with the laser and don’t cut too deep into materials with the CNC and you’ll be fine. Get a CNC rate calculator to make sure you don’t set your feed rate too high for the bit and material you are working with. Feel free to ask questions.

this was my first purchase from Banggood. A little scary but turned out great. make sure all the screws are done up in the preassembled stuff and tighten the wheels on the runners. watch YouTube videos on how to set the v-slot wheels up. There are two tiny hex screws that hold the hot end in place hidden behind the cooling fan. Both of these were loose in mine and I hadn’t realised it was wrong so had a week of poor results. once I got it tightened into place the machine has been a dream. Use the included software where you can. the new cura software works but is a pain to get setup. Most PLA prints well with 205C hot end and 45C bed. Nylon230 by Taulman works but not really suitable for small parts (it’s too soft and flimsy). ABS is still difficult to work with but it does work. I also got the a a Creality enclosure which fits perfectly around it and is ideal for keeping smells and heat in. I thought purchasing through Banggood would be risky but it turned out to be excellent. The picture is of the first two prints before the hot end was even fitted properly!! BTW, if you want really high def prints, use 0.05mm (yes, 0.05, not 0.5 or 0.1). The steppers work great with it and translucent and clear materials REALLY come out translucent and clear. I’m not kidding, it’s amazing!!! This is a superb machine. don’t expect to cut material with the laser and don’t cut too deep into materials with the CNC and you’ll be fine. Get a CNC rate calculator to make sure you don’t set your feed rate too high for the bit and material you are working with. Feel free to ask questions.

all has to be adjusted mechanicaly after delivery. -Added 2 distances and washer of 12.5mm -Centered the toothed weels to the toothed belts -Machinery has to be checked/ ease of operation bubble level

all has to be adjusted mechanicaly after delivery. -Added 2 distances and washer of 12.5mm -Centered the toothed weels to the toothed belts -Machinery has to be checked/ ease of operation bubble level

all has to be adjusted mechanicaly after delivery. -Added 2 distances and washer of 12.5mm -Centered the toothed weels to the toothed belts -Machinery has to be checked/ ease of operation bubble level

all things are perpect such a nice printer and quick and safe delivery.

all things are perpect such a nice printer and quick and safe delivery.

all things are perpect such a nice printer and quick and safe delivery.

Szybka dostawa, 4 dni. Wszystko wygląda świetnie, wystarczą małe regulacje i można działać. Jakość elementów jest zadowalająca.

Szybka dostawa, 4 dni. Wszystko wygląda świetnie, wystarczą małe regulacje i można działać. Jakość elementów jest zadowalająca.

Szybka dostawa, 4 dni. Wszystko wygląda świetnie, wystarczą małe regulacje i można działać. Jakość elementów jest zadowalająca.

حسب المواصفات انصح بشرائها

حسب المواصفات انصح بشرائها

حسب المواصفات انصح بشرائها

Excellent printer! Print quality is good. Haven't tried the CNC or laser head yet, but judging from the build quality, tools and support provided, it will be good!

Excellent printer! Print quality is good. Haven't tried the CNC or laser head yet, but judging from the build quality, tools and support provided, it will be good!

Excellent printer! Print quality is good. Haven't tried the CNC or laser head yet, but judging from the build quality, tools and support provided, it will be good!