AC90-240V 20W 30W DIY LED Chip Board Panel Bead met LED Voeding Driver Transformator
Een deel van de recensie is automatisch vertaald.
I bought a 30W warm white LED with power supply. It works very well, does not flicker at all, but it is only 22-23 Watt. See the pictures. The warm white LED looks about 4000K, nice white. You can connect the power supply direct to 110V or 230V AC. The LED needs heat sink, at least 10x5x3cm. I got different power supply from what's on the picture but it is OK. LED driver IC: DP2836D. The power supply must be isolated well. The printed circuit does not have protective lacquer, so it is worth painting it. 72 LEDs are on the flood panel, on 24x24mm area. The size of the aluminium is 40x46mm. It is worth the money, I will by more.
Only used these one so far and am very happy. Good bright light and coverage.
I wired it up and it worked for one second before powering off - think I blew the COB, not sure if the regulator was the issue.
Works fine but only 22 & 16 Watt. I bought several 30 and 20 Watt warm white LEDs with power supply. They work very well. Do not flicker at all. But the 30W LED consums only 22 Watt and the 20W LED consums 16 Watt. The warm white LED looks about 4000K, nice white. The size of the aluminium is 40x46mm. The LED needs heat sink, at least 10x5x3cm. You can connect the power supply direct to 110V or 230V AC. The power supply must be isolated well. The printed circuit does not have protective lacquer, so it is worth painting it. Overall, it's a good deal.
recibido correctamente. Ahora a probar y funcionar
Works well, as advertised.
arrivato nei tempi e funzionante.
Gute Verarbeitung und super preis leistung muss es noch testen.
Utilizzati per modificare fari esterni,ottimo fascio di luce, ottimo prezzo
perfetto