6Pin FTDI FT232RL USB naar Seriële Adapter Module USB naar TTL RS232 Kabel
Een deel van de recensie is automatisch vertaald.
The USB casing snaps together, so it can be opened. My multi-meter shows there is 5 volts on the red wire. The red wire is soldered to a pad labelled 5 v. There is an unoccupied 3.3 v pad, so it seems the voltage could be changed with a soldering iron. Note that the description says the logic levels are fixed at 3.3v. There are no LEDs. The device works as expected when used to connect a GPS module to my PC.
This converter is automatically recognized by my Windows 10 64bit as a real FTDI adapter. No fiddling with device drivers installations. Very satisfied !
It is functional ftdi adapter
Great FTDI adapter, works as expected - YAY!
It works perfectly, but be aware that the red/black power pins deliver 5 volts. And that the rxd/txd are 3v3 tolerant. zo you have to use the Rxd with a 10k or 4k7 ohm resistor. All-and-all it's a good product for use in my microcontroller projects.
Thanks
arrived in 26 days product matches description and is of good value for money
I bought one of the little ESP8266 modules from Arilux with the idea to re-program. This worked straight out of the box using the tutorial found here https://github.com/mertenats/Arilux_AL-LC0X 10/10 would buy again
Plugged straight on a Raspberry Pi and worked first time without issue.
Able to use it for debugging UART devices, works just fine without drivers