4 DOF Acryl Robotarm 3D Rotatiemachine + P0090 Servo DIY Kit
Een deel van de recensie is automatisch vertaald.
Quality product, fast cargo ;)
Below are the photos of the parts broken when shipped. Other items are ok, though... Please replace. I have been a banggood customer and had ordered many items already.
es un producto medio bueno, debes tener cuidado cuando manipules el metracrilato, si aprietas mucho los tornillos se rompe!....de todos modos, esta bien....y quedo muy bien mi rover.......lo recomiendo....
My 8 years old son can set it up with minimum supervision. I only help to connect it to an Arduino with some POTs for control. The plastic is a bit flimsy so can't put too much force onto it. Overall, it's a good buy for first-time robotic arm player.
When you build it with the servos it results a bit fragile, but still working.
thank you
a mis alumnos les encanto nos servirá mucho para nuestras practicas con arduino
This is excellent value for money and provides a great learning experience. It would benefit from some instructions. The pictures in the description are helpful if incomplete, I spent a lot of time dis assembling to tighten particular screws and reassembling.
The bad: seeing that there were no assembly instructions provided, it took almost 2 hours to assemble - and if one has big hands and fingers, it will likely take ~3 hours :(. Also, the servos are not of very high quality, as one of the gear's teeth broke after first use. I had to take that servo apart and re-align the gear, so that at least it will have some degree of operable movement (i.e. < the 180 degrees just for that one servo). The good: it was fun to build and write simple Arduino-based code to operate the arm. I used the joystick to control 2 servos simultaneously and /w the press of a the joystick's push button, control the other two servos. All parts were properly provided and even some screws/nuts were left over. Overall, it was a great project to work on over the weekend.
Good !!