Klantbeoordelingen

Schrijf een beoordeling
  • Alle beoordelingen(165)
  • Afbeeldingen
  • Videos
  • Ster
    • Ster(165)
    • 5 Star(158)
    • 4 Star(3)
    • 3 Star(0)
    • 2 Star(0)
    • 1 Star(4)
Sorteren op:
Top recensie
  • Top recensie
  • Meest nuttig
  • meest recent
Recensies alleen uit uw land (United States)
|
Toon origineel

Een deel van de recensie is automatisch vertaald.

  • Yana
    UA
    26/01/2021

    Все отлично!

    Reacties
    Toon origineel
  • 19/08/2021

    very nice pcb

    Reacties
    Toon origineel
  • 22/07/2017

    Base on Analog Devices ADF4351 PLL generator IC it is good substitute for much more expensive development board. You will need to program it over I2C bus from some 3.3V development board thou. There is plenty of Arduino UNO projects, but I suggest use of Arduino DUE or some other 3.3V-Ready boards.

    Reacties (3)
    Toon origineel
  • 21/11/2017

    I control this module via Arduino nano,sketch from http://f6kbf.free.fr. It works fine, I check it from 50 MHz to 2.4 GHz with no problems. Good choice!

    Reacties (1)
    Toon origineel
  • 30/06/2019

    A good PLL synth. The ADF4351 from Analog Device is a PLL synthetizer capable of generating frequency from 35 MHz to 4.4GHz with very low jitter. A useful toy for a radio amateur.

    Reacties
    Toon origineel
  • 08/05/2020

    Great thing, I ordered another one to also make a RF generator for a friend. In the first case, the internal reference deviated a little, but in the latter case it did not. Since the temperature stability of the oscillator is satisfactory, there is a simple solution. The oscillator frequency is measured and this value is entered into the SW. The CE pin must be HIGH for proper operation. We can connect it to 3.3V, but it is better to select a free pin on the processor, set it to HIGH and connect it to CE. I use ESP32 myself and I connected the CE pin to EN on the processor. For low phase noise, the power supply to the ADF4351 module must be separate from the processor power supply.

    Reacties
    Toon origineel
  • 19/07/2019

    Lässt sich leicht mit einem Arduino ansteuern. Dabei unbedingt beachten, dass die Eingänge nur 3.3V vertragen! Also für Data, Clk und LE dreimal je einen Spannungsteiler aus einem 1.8k und einem 3.3k Widerstand zwischen schalten. Muxout ist ein Ausgang und kann direkt verbunden werden. Außerdem muss CE mit 3.3V verbunden werden, sonst reagiert das Modul nicht!

    Reacties
    Toon origineel
  • 31/08/2018

    The adf4351 module, returned, works great. In the photo is clearly seen the frequency commanded by arduino, the LED lit for PLL on the mode and the lit, squelch, KVS-1P, but also the old module that did not work. All the materials are bought from BG. The application is F1CJN's and is freely available, being mentioned in BG's rewievs.  Thanks BG for understanding BANGGOOD is GOOD!

    Reacties
    Toon origineel
  • 22/12/2017

    работает все отлично. гармоник сигнала много правда. для работы в радиоэфире нужны будут фильтры.

    Reacties
    Toon origineel
  • 23/04/2020

    Excellent product, works as expected, I already order another one. The internal 25MHz reference is not very precise and stable, I recommended to use an external 10MHz reference to get a very precise frequency. But altogether, I am very pleased with product!

    Reacties
    Toon origineel
Show:

    Totaal 0 Pagina's

    Ga naar pagina

    Wellicht ben je ook geïnteresseerd in

    recommendation for you
    • US$14.99
    • US$11.99
    • US$32.99
    • US$51.99
    • US$24.99
    • US$17.73
    • US$16.99
    • US$15.99
    • US$6.99
    • US$8.99
    • US$19.99
    • US$9.99
    • US$22.99
    • US$16.99
    • US$18.37
    • US$18.99
    • US$27.99
    • US$14.99